[ale] OT: Cisco 2900-XL configure another Vlan

[Christopher Fowler]

Also since I'm trying to configure a private subnet would this concern
me?
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35xu/scg/kiconfig.htm#xtocid57492

On Thu, 2006-02-09 at 17:10 -0500, Christopher Fowler wrote:
> A while back I got some help configuring a VLAN on a switch.  Now I need
> to configure another VLAN but the commands seem to be different.  IOS
> versions are different.
> 
> Switch#show vlan brief
> VLAN Name                             Status    Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1    default                          active    Fa0/1, Fa0/2, Fa0/3,
> Fa0/4,
>                                                 Fa0/5, Fa0/6, Fa0/7,
> Fa0/8,
>                                                 Fa0/9, Fa0/10, Fa0/11,
> Fa0/12,
>                                                 Fa0/13, Fa0/14, Fa0/15,
> Fa0/16,
>                                                 Fa1/1, Fa1/2, Fa1/3,
> Fa1/4,
>                                                 Fa2/1, Fa2/2, Fa2/3,
> Fa2/4
> 1002 fddi-default                     active    
> 1003 token-ring-default               active    
> 1004 fddinet-default                  active    
> 1005 trnet-default                    active    
> 
> Now I try to configure a new vlan
> 
> Switch#configure terminal
> Enter configuration commands, one per line.  End with CNTL/Z.
> Switch(config)#vlan 500
>                 ^
> % Invalid input detected at '^' marker.
> 
> Switch(config)#
> 
> Here are the instructions I'm referencing:
> 
> http://www.ale.org/archive/ale/ale-2004-12/msg00636.html
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale