[ale] CD-RW problems

[Christopher Fowler]

I removed a CD-RW from a Winbloze box to my Linux desktop.
It works flawlessly under Windows.  In Linux I'm getting the following
errors.  I can read CD's just fine.  I can not burn them.


scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'BTC     '
Identifikation : 'BCE1610IM       '
Revision       : '0.19'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1971200 = 1925 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   497 MB        
Total size:      571 MB (56:38.21) = 254866 sectors
Lout start:      572 MB (56:40/16) = 254866 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 104983
Starting to write CD/DVD at speed 8 in dummy TAO mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Starting new track at sector: 0

Track 01:    0 of  497 MB written.
Track 01:    1 of  497 MB written (fifo  89%) [buf  66%]   8.2x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 02 E8 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, deferred error, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.012s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00

write track data: error after 1523712 bytes
Writing  time:    6.790s
Average write speed 501.0x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.001s
cdrecord: fifo had 88 puts and 25 gets.
cdrecord: fifo was 0 times empty and 3 times full, min fill was 82%.