[ale] Continuing Saga of Centos 5.6

Greg Clifton gccfof5 at gmail.com
Tue Aug 9 14:18:45 EDT 2011


Boot is supposed to be on the mirrored WD drives on the mobo controller. The
3Ware controller is for the data drives which are also mirrored. I told the
installer to install to the WD drives. I assume once I get it booting off
the mobo, I can load the 3Ware drivers (if necessary) to get to the 3Ware
RAID, but the installer did see the drives on the 3Ware, so maybe the
drivers will have already installed.
Thanks Jim,

Going to try rescue now. If no go, I'll do a reinstall and babysit it more
than I did last time to see if there was some error that happened with the
previous install.

Just curious, but what would cause Grub to choke during install? The disc
check said it was a good burn, so maybe fingerprints on the disc? Cosmic
rays?

Greg

On Mon, Aug 8, 2011 at 8:00 PM, Jim Kinney <jim.kinney at gmail.com> wrote:

> Is /boot in raid? Software raid is supported but hardware may require a
> kernel mod.
>
> That said, plain blinking underscore and no kernel failure data sounds like
> grub puked during mbr write in install.
>
> Use rescue on dvd and try grub unstall manually.
>
> Or zero first mb on drives and reinstall if you can't see anaconda.log in
> /root from rescue.
> On Aug 8, 2011 6:11 PM, "Greg Clifton" <gccfof5 at gmail.com> wrote:
> > So I downloaded the isos and burned the discs, scanned the first DVD for
> > errors and it passed, then ran the install for Server w/ GUI, entered the
> > root pwd and the machine chewed on the 1st disc without ever asking for
> the
> > 2nd. Eventually it said something like "successfully installed" remove
> DVD
> > and reboot. When I reboot, all I get is a blinking underline cursor. I
> > suspect that I need(ed) to load some driver for the hard drives during
> the
> > install, but it seems strange that I don't get a "no boot device, reboot
> and
> > select..." error or any kernel panic. Any suggestions?
> >
> > FYI, the configuration is:
> > Mbd: Asus P7F-M
> > CPU: Pentium Dual Core G6950
> > RAM: 2x KINGSTON 2GB DDR3 1333MHZ ECC UNBUFF
> > Boot HDD: 2x WD2503ABYX 250GB Enterprise SATA 7200rpm
> > Data HDD: 2x Seagate 1TB Enterprise SATA ST1000NM0011
> > Data Controller: 3WARE 9650SE-2LP KIT 2 PORT SATA II
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.ale.org/pipermail/ale/attachments/20110809/fabe2276/attachment.html 


More information about the Ale mailing list