[ale] Possible errors on Hard Drive

List lst at wiencko.net
Fri Dec 21 21:47:49 EST 2007


Not sure what is going on, but here's a thread from someone else who had 
the same problem with a Promise SATA 300: 
http://www.mail-archive.com/linux-ide@vger.kernel.org/msg11384.html (see 
previous message in thread for log extract - looks a lot like yours).  
He proposes a fix which may or may not help you.

Tom



Scott Castaline wrote:
> Checking my logs and noticed that I'm suddenly getting what looks like 
> drive errors but not sure. I've noticed the following repeated about 3 
> times every once in a while:
> ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> ata4.00: port_status 0x20080000
> ata4.00: cmd c8/00:30:ef:e8:cb/00:00:00:00:00/e6 tag 0 cdb 0x0 data 
> 24576 in
>         res 50/00:00:1e:e9:cb/00:00:00:00:00/e6 Emask 0x2 (HSM violation)
> ata4: soft resetting port
> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4.00: configured for UDMA/133
> ata4: EH complete
>
> followed by:
> sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
> sd 3:0:0:0: [sdd] Write Protect is off
> sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't 
> support DPO or FUA
>
> I just recently changed HA from an Adaptec 2 port SATA 150 to a 
> Promise SATA 300TX4, 4 port SATA 300. I have all WD drives.
> port 1 = WD1600  (150)
> port 2 = WD5000  (300)
> port 3 = WD360    (150)  Raptor 10K rpm
> port 4 = WD360    (150)  Raptor 10K rpm
>
> Any ideas? Everything I've found is close, but no cigar. Also any 
> documentation I've found is like from 2004. I'm not too sure how 
> current that is.
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale



More information about the Ale mailing list