[ale] multi-processor vs. Tape Drive

Jeff Hubbs hbbs at comcast.net
Wed May 25 11:34:16 EDT 2005


I'd surmise that the SMP kernel config simply isn't otherwise the same
as the non-SMP kernel config; they may well differ with respect to SCSI
tape support.

Jeff

On Wed, 2005-05-25 at 10:33 -0400, James McFarland wrote:
> I hope someone on this list can point me in the right direction.
> 
> I am trying to turn an old dual P3  server into a basic fileserver.  I added an adaptec 2200s Dual Chanel SCSI Raid Controller.  To Chanel  0 I connected 3 drives for a RAID 5.  To Chanel  1 I connected an external Tape drive.  I then installed Fedora Core 3.
> 
> When I use the SMP Kernel, the system cannot find the Tape Drive (lsmod shows st isn't loaded).  When I use the single processor kernel, It finds the Tape drive just fine, but I get only one processor.  In either case, it sees the RAID array just fine.
> 
> I have updated the BIOS on both the motherboard & the SCSI card.  Removing the RAID array or changing SCSI channels makes no difference.
> 
> It seems to me that there is a difference in the Kernel configuration somewhere.  However, my kernel knowledge is limited at best & my initial attempts to locate a meaningful difference have been unsuccessful.
> 
> I am running the basic Kernels installed with Core 3 (2.6.11-1.14_FC3).
> 
> If anyone can offer a suggestion as to where I should look in my system's configuration, or direct me towards an appropriate net resource I'd really appreciate it.
> 
> -James
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale



More information about the Ale mailing list