[ale] multi-processor vs. Tape Drive
Robert L. Harris
Robert.L.Harris at rdlg.net
Wed May 25 10:57:22 EDT 2005
What happens if you load the SMP kernel and "modprobe st" ?
Thus spake James McFarland (stalax at earthlink.net):
> I hope someone on this list can point me in the right direction.
>
> I am trying to turn an old dual P3 server into a basic fileserver. I added an adaptec 2200s Dual Chanel SCSI Raid Controller. To Chanel 0 I connected 3 drives for a RAID 5. To Chanel 1 I connected an external Tape drive. I then installed Fedora Core 3.
>
> When I use the SMP Kernel, the system cannot find the Tape Drive (lsmod shows st isn't loaded). When I use the single processor kernel, It finds the Tape drive just fine, but I get only one processor. In either case, it sees the RAID array just fine.
>
> I have updated the BIOS on both the motherboard & the SCSI card. Removing the RAID array or changing SCSI channels makes no difference.
>
> It seems to me that there is a difference in the Kernel configuration somewhere. However, my kernel knowledge is limited at best & my initial attempts to locate a meaningful difference have been unsuccessful.
>
> I am running the basic Kernels installed with Core 3 (2.6.11-1.14_FC3).
>
> If anyone can offer a suggestion as to where I should look in my system's configuration, or direct me towards an appropriate net resource I'd really appreciate it.
>
> -James
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
:wq!
---------------------------------------------------------------------------
Robert L. Harris | GPG Key ID: E344DA3B
@ x-hkp://pgp.mit.edu
DISCLAIMER:
These are MY OPINIONS With Dreams To Be A King,
ALONE. I speak for First One Should Be A Man
no-one else. - Manowar
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
More information about the Ale
mailing list