[ale] dd & unexpected soft update inconsistency, HUH ?

Greg Freemyer greg.freemyer at gmail.com
Fri Apr 15 19:06:44 EDT 2005


On 4/15/05, Courtney Thomas <ccthomas at joimail.com> wrote:
> On Fri, 2005-04-15 at 10:47, Greg Freemyer wrote:
> > On 4/15/05, Courtney Thomas <ccthomas at joimail.com> wrote:
> > > On Fri, 2005-04-15 at 08:49, Stephan Uphoff wrote:
> > > > On Fri, 2005-04-15 at 09:25, Courtney Thomas wrote:
> > > > > I've been using dd for years to mirror my server HD without problems.
> > > > >
> > > > > The command used is:        dd if=< original HD > of=< mirror HD >
> > > >
> > > > I don't think dd is a good idea on a life file system ....
> > > > ...but you probably know this so let's ignore this for now.
> > > >
> > >
> > > Stephen,
> > >
> > > Thank you for your help  :-)
> > >
> > > I'm not doing this on a live file system. I'm booting up with a CD and
> > > doing this on unmounted filesystems.
> > >
> > > > > However, yesterday, for the first time, when I do this, I get the error:
> > > > >
> > > > >     UNEXPECTED SOFT UPDATE INCONSISTENCY
> > > > >
> > > > > This happens to mirror HD /usr only.
> > > > > Mirror HD / and /var do not exhibit this problem.
> > > > >
> > > > > If I fsck the mirror HD, all is OK except mirror HD /usr in which I get
> > > > > a plethora of errors complaining about soft update inconsistencies.
> > > > >
> > > > > If I attempt to examine mirror HD /usr with ls -l, I see there's also a
> > > > > raft of BAD FILE DESCRIPTORs.
> > > > >
> > > > > Further, the dd completion screen shows... an error coming from the
> > > > > original HD, i.e. not the mirrored HD, drive. It only reports "[original
> > > > > HD] input error". But when I fsck all partitions of that original HD,
> > > > > all is reported as satisfactory.
> > > >
> > > > Looks like you have a bad sector somewhere on the disk.
> > >
> > > I agree it looks like it, maybe. But why doesn't fsck find this ?
> > >
> > > > Is there something in the log file?
> > >
> > > Which log file ?
> > >
> > > > The /usr partition is probably only partially copied.
> > >
> > > You are correct on this too.
> > > >
> > > > You can try the following:
> > > > 1) tar up /usr so that all used data blocks will be read.
> > > >    This may indicate an unreadable file .. or you may be lucky and the
> > > > bad sector is in unused space.
> > >
> > > tar needs a mounted filesystem right ? [I don't use tar.]
> > >
> > > > 2) Locate the defect sector (dd to /dev/null with offset,counts...)
> > >
> > > > 3) Write zeroes to the defect sector to "repair" it and fsck..
> > >
> > > I understand the writing zeroes to the bad sector using an offset, but
> > > how do I exactly determine how many zeroes to write ?
> > >
> > > Also, I assume you recall that fsck gives no error message now.
> > >
> > > > 4) Restore the file that was not readable in 1)
> > > >
> > > > I believe that there are disk repair tools in the ports tree but never
> > > > had the need to try them.
> > > >
> > > > > What's goin' on here and how can I remedy it. This is my gateway server
> > > > > and I urgently need to resolve this.
> > > > >
> > > > > Appreciatively,
> > > > >
> > > > > Courtney
> > > > >
> >
> > Basically it sounds like your disk crapped out.
> >
> > Trying to salvage the old disk itself is likely a waste of time and
> > will lead to future problems.
> >
> > I know you were trying to make a backup, but do have a recent one you
> > could use?
> >
> > If you do have to disk recovery of the data, I would reperform your dd as:
> >
> > dd if=/dev/orig of=/dev/target conv=noerror,sync
> >
> > Then run fsck etc. on the new disk.  Or better yet on a cc copy of the
> > new disk.  ie. Save away the dd image for repeated recovery attempts.
> >
> > In the above, noerror says to continue copying even in the presence of
> > errors.  sync says to fill the failed read blocks with zeros.
> > (Default behavior is to skip the block.  Very bad if you need to
> > reconstruct the filesytem because the offsets will be wrong.)
> >
> > You can also try dd_repair (I think).  I have not used it, but it is
> > designed to get data off of a failing disk.
> >
> > Greg
> 
> Greg,
> 
> Thank you so much for your kind attention.
> 
> I've already used dd with the conv=noerror, sync and the mirror is now
> bootable but I don't know what I've lost, both from the original and the
> mirror. BTW fsck was OK with both.

If dd encountered errors on read, it should have shown you which sectors failed.

Figuring out what logical file, inode, etc. was using that sector is
another matter.

> Do I understand correctly that now the mirror offsets will be wrong ?
 
No, without the "sync" option the offsets would have been wrong if
errors were encountered.


-- 
Greg Freemyer
The Norcross Group
Forensics for the 21st Century



More information about the Ale mailing list