[ale] problem after writing CDR

[rob hoppe]

Andy De Petter wrote:

> Hi guys,
>
> I'm having a bit of a problem, and I'm wondering what might be causing it.
> The way I see it, it's either cdrecord, that can't seem to succeed in
> finishing the CD... or it might be the CDR itself, that is bad quality
> (although this would surprise me - I've been trying over 20 times already,
> without luck).
>
> I'm trying: "cdrecord -v -pad -dao speed=4 dev=0,0 isotest.iso"
>
> and I get:
>
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'HP      '
> Identifikation : 'CD-Writer+ 8100 '
> Revision       : '1.0g'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1040128 = 1015 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  700 MB         padsize:  30 KB
> Total size:     805 MB (79:45.26) = 358895 sectors
> Lout start:     805 MB (79:47/20) = 358895 sectors
> Current Secsize: 2048
>   ATIP start of lead in:  -11231 (97:32/19)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Short strategy type (Phthalocyanine or similar)
> Manuf. index: 27
> Manufacturer: Prodisc Technology Inc.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 954
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> Track 01: 700 of 700 MB written (fifo 100%).
> Track 01: writing  30 KB of pad data.
> Track 01: Total bytes read/written: 734986240/735016960 (358895 sectors).
> Writing  time: 1235.458s
> Fixating...
> cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
> CDB:  35 00 00 00 00 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 201.191s timeout 200s
> Trouble flushing the cache
> Fixating time:  202.166s
> cdrecord: fifo had 11577 puts and 11577 gets.
> cdrecord: fifo was 0 times empty and 11506 times full, min fill was 95%.
>
> Any ideas, on what might be causing this?
>
> Thanks in advance,
>
> -Andy
>
> *** DISCLAIMER ***
> This e-mail and any attachments thereto may contain information, which
> is confidential and/or protected by intellectual property rights and
> are intended for the sole use of the recipient(s) named above. Any use
> of the information contained herein (including, but not limited to,
> total or partial reproduction, communication or distribution in any
> form) by persons other than the designated recipient(s) is prohibited.
> If you have received this e-mail in error, please notify the sender
> either by telephone or by e-mail and delete the material from any
> computer. Thank you for your cooperation.
>
> --
> To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.

HERE IS ONE OF THE REASONS FOR THE WHERE ARE WE!  I hope someone can help Andy but
he is writing us at 11 A.M. Monday and i received it early Monday A.M.!!!

Rob

--
_/_/_/_/_/_/_/_/_/_/_/_/
_/  Rob Hoppe  (Atlanta)
_/  770-995-5099
_/  770-560-1050 cell
_/  154*32*21121 Nextel Radio
_/  770-338-5885 fax
_/  253-276-8905 efax
_/_/_/_/_/_/_/_/_/_/_/_/


--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.