[ale] problem after writing CDR

Andy De Petter adepette at krameria.net
Mon Sep 10 05:28:43 EDT 2001



Hi guys,

I'm having a bit of a problem, and I'm wondering what might be causing it.
The way I see it, it's either cdrecord, that can't seem to succeed in
finishing the CD... or it might be the CDR itself, that is bad quality
(although this would surprise me - I've been trying over 20 times already,
without luck).

I'm trying: "cdrecord -v -pad -dao speed=4 dev=0,0 isotest.iso"

and I get:

Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8100 '
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1040128 = 1015 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  700 MB         padsize:  30 KB
Total size:     805 MB (79:45.26) = 358895 sectors
Lout start:     805 MB (79:47/20) = 358895 sectors
Current Secsize: 2048
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 954
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 700 of 700 MB written (fifo 100%).
Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 734986240/735016960 (358895 sectors).
Writing  time: 1235.458s
Fixating...
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 201.191s timeout 200s
Trouble flushing the cache
Fixating time:  202.166s
cdrecord: fifo had 11577 puts and 11577 gets.
cdrecord: fifo was 0 times empty and 11506 times full, min fill was 95%.

Any ideas, on what might be causing this?

Thanks in advance,

-Andy

*** DISCLAIMER ***
This e-mail and any attachments thereto may contain information, which
is confidential and/or protected by intellectual property rights and
are intended for the sole use of the recipient(s) named above. Any use
of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any
form) by persons other than the designated recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender
either by telephone or by e-mail and delete the material from any
computer. Thank you for your cooperation.

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.





More information about the Ale mailing list