[ale] Sound Blaster 16 recognized as Ensoniq card

[Sheahan, John (PCLN-NW)]

Paul,

First of all, thanks for taking the time to help me. I ran the "modprobe
es1371" command and it returned with no errors but it didn't help. I already
edited /etc/modules file to say:

	alias sound-slot-0 es1371

but that didn't help. 

-----Original Message-----
From: Paul Kinsley [mailto:paul at motionrealityinc.com]
To: ale at ale.org
Sent: Monday, November 19, 2001 11:15 AM
To: Sheahan, John (PCLN-NW)
Subject: Re: [ale] Sound Blaster 16 recognized as Ensoniq card


you might have to add the support in by hand.  Try
the command modprobe es1371.  If that returns without
an error message then you can investigate adding the
driver support to /etc/modules.conf.  Its not
difficult.



Sheahan, John (PCLN-NW) wrote:

> I can't even get that far. sndconfig comes up and says "Ensonig 5880 Audio
> PCI is not supported" and then sndconfig closes
> 
> -----Original Message-----
> From: Paul Kinsley [mailto:paul at motionrealityinc.com]
> Sent: Monday, November 19, 2001 10:57 AM
> To: Sheahan, John (PCLN-NW)
> Subject: Re: [ale] Sound Blaster 16 recognized as Ensoniq card
> 
> 
> Try using the es1371 sound driver.
> 
> The 5880 chipset is mentioned in the driver.
> 
> Sheahan, John (PCLN-NW) wrote:
> 
> 
>>Can anyone tell me how to get my Red Hat 7 system to work with a Sound
>>Blaster 16 that is recognized as a Ensoniq 5880 when I run sndconfig?
>>
>>---
>>This message has been sent through the ALE general discussion list.
>>See http://www.ale.org/mailing-lists.shtml for more info. Problems should
>>
> be 
> 
>>sent to listmaster at ale dot org.
>>
>>
>>
> 
> 


-- 
Paul Kinsley
Senior Systems Engineer
paul at motionrealityinc.com
http://motionrealityinc.com

---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.