[ale] SSH

[Jason Lynn]

Here's the output I'm receiving...

ssh -v -l root <not disclosed>
OpenSSH_2.9p1, SSH protocols 1.5/2.0, OpenSSL 0x0090601f
debug1: Reading configuration data /usr/local/etc/ssh_config
debug1: Seeding random number generator
debug1: Rhosts Authentication disabled, originating port will not be 
trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 611 geteuid 0 anon 1
debug1: Connecting to <not disclosed> [<not disclosed>] port 22.
debug1: temporarily_use_uid: 611/600 (e=0)
debug1: restore_uid
debug1: temporarily_use_uid: 611/600 (e=0)

Also... when I finally get in... it's kicks me off after a min or two and 
then doesn't let me connect for a while afterward!! I'm starting to think my 
computer has a personality; a nasty one, at that.  Perhaps I just futzed 
something up somewhere along the line.. I think I'll try and reinstall...

>From: Michael Perigard <michael at ancker.net>
>To: Jason Lynn <jason_lynn_ at hotmail.com>
>CC: ale at ale.org
>Subject: Re: [ale] SSH
>Date: Wed, 30 May 2001 16:02:36 -0400 (EDT)
>MIME-Version: 1.0
>Received: from [24.23.200.112] by hotmail.com (3.2) with ESMTP id 
>MHotMailBCDE9CCD0076400437491817C8700A300; Wed May 30 13:02:22 2001
>Received: from localhost (michael at localhost)by potpie.ancker.net 
>(8.8.7/8.8.7) with ESMTP id QAA24966;Wed, 30 May 2001 16:02:36 -0400
>From michael at ancker.net Wed May 30 13:03:48 2001
>In-Reply-To: <F233Sv0YKpDS7hx27kB000083c7 at hotmail.com>
>Message-ID: <Pine.LNX.4.04.10105301557150.24937-100000 at potpie.ancker.net>
>
>Try running ssh with lots of verbosity (ssh -v or -vv or -vvv, depending
>on if you compiled in debugging).
>
>My connection from work takes a while, and i found that my AIX machine is
>not configured with any /dev/random, and the delay is ssh creating its own
>random data (from various log files etc.)
>
>While this may not be your problem, running ssh -v will show every step
>ssh takes to connect to the remote host and more, so you should be able to
>track down the bottleneck.
>
>Michael Perigard
>UNIX CADD/CAM Support
>Gulfstream Aerospace
>
>
>
>On Wed, 30 May 2001, Jason Lynn wrote:
>
> > Thanks for all the replies, but...
> >
> > I tried putting the IP into my /etc/hosts file... no luck.
> >
> > I tried dig -x from my home machine and it returned in less than a 
>second...
> > no luck.
> >
> > Has anyone else had this problem with openssh?
> >
> > Thanks,
> >
> > Jason
> >
> >
> > >From: "Michael H. Warfield" <mhw at wittsend.com>
> > >To: Jason Lynn <jason_lynn_ at hotmail.com>
> > >CC: ale at ale.org
> > >Subject: Re: [ale] SSH
> > >Date: Tue, 29 May 2001 17:56:28 -0400
> > >
> > >On Tue, May 29, 2001 at 04:52:50PM -0500, Jason Lynn wrote:
> > > > Forgot to ask one more question...
> > >
> > > > SSH takes a few MINUTES to connect from work to my home machine.  I
> > >suspect
> > > > it is a DNS problem (as ssh is trying to reverse lookup my address 
>here
> > > > which has no dns).  Any ideas on how to confirm/fix?
> > >
> > >	That's usually the reverse DNS lookup.  Do a "dig -x" with the
> > >IP address you are connecting FROM and see what happens.  If it takes
> > >a couple of minutes and then gives you an error (or no answer section)
> > >then that's your problem.  Solution is to get your address (client) 
>added
> > >to the appropriate reverse in-addr.arpa zone.
> > >
> > > > Thanks once again,
> > >
> > > > Jason
> > > > _________________________________________________________________
>
>"No, nothing's simple."
>  - PINE Documentation
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.