[ale] Red Hat 6.1 Hard Drive always accessing

[Stephen F Nicholas]

Hi Ale,
FWIW,
I have seen this before, when multiple drives are used, and the master and
slave jumpers are not set correctly.  May or not be..just thought I'd pass
this along.

Steve

=======================================================
| Steve Nicholas             |                        |
| Unix System Programmer     |  A risk is not a risk  |
| Georgia State University   |  until it is taken.    | 
| snicholas at gsu.edu          |                        |
| 404-651-2639               |  BBROYGBVGW            |
=======================================================

On Tue, 18 Jul 2000, Wandered Inn wrote:

> Date: Tue, 18 Jul 2000 10:15:29 -0400
> From: Wandered Inn <esoteric at denali.atlnet.com>
> To: ale at ale.org
> Subject: Re: [ale] Red Hat 6.1 Hard Drive always accessing
> 
> Jeff Hubbs wrote:
> > 
> > I can't imagine this fix working.  IMH(Experience), just about any
> > real-world circuit with a backwards-connected LED will result in the LED not
> > lighting at all.  If the drive and drive controller are working normally yet
> > the LED stays lit, then there is a (largely inconsequential) problem in the
> > LED drive circuit.
> 
> Whether or not there is a problem with the circuit, you're welcome to
> come visit.  I can demonstrate this on at least two machines I've got
> currently running.  In one of my mb manuals it actually suggests this as
> a solution.
> 
> > 
> > - Jeff
> > 
> > > -----Original Message-----
> > > From: Wandered Inn [mailto:esoteric at denali.atlnet.com]
> > > Sent: Tuesday, July 18, 2000 8:44 AM
> > > To: ale at ale.org
> > > Subject: Re: [ale] Red Hat 6.1 Hard Drive always accessing
> > >
> > >
> > > Douglas Knudsen wrote:
> > > >
> > > > Are you sure it is running?  I have a similar problem with one of my
> > > > harddrives.  The red access LED light stays on constantly.
> > > I can't figure it
> > > > out.  I pull the drive and put a different one in and the
> > > problem goes away, so
> > > > I am convinced it is the HD not the IDE device, but thats it.
> > >
> > > It could be that you have your hd led hooked up backwards,
> > > which in this
> > > case, it may very well stay on literally all the time.  If it does any
> > > flickering, that is off at all, this is not the problem.  If
> > > however, it
> > > stays on from the time you boot, then try reversing your hd led
> > > connection.
> > >
> > > >
> > > > On Fri, 14 Jul 2000, Chris Cillo wrote:
> > > > >
> > > > > My hard drive seems to be running constantly. Anyone have
> > > any ideas why?
> > > > >
> > > > > Thanks,
> > > > > Chris
> > > > >
> > > > >
> > > >
> > > > ----------------------------------------
> > > > Content-Type: text/html; name="unnamed"
> > > > Content-Transfer-Encoding: quoted-printable
> > > > Content-Description:
> > > > ----------------------------------------
> > > >
> > > > --
> > > > Cheers!
> > > > ------------------
> > > > Douglas Knudsen
> > > > Alltel Information Services
> > > > Internal Support and Development   <--Hey!  These views are MINE!
> > > >
> > > > "Nuclear war would really set back cable."
> > > >                 -- Ted Turner
> > > >
> > > > "Guns don't kill people, physics does!"
> > > > John Lithgow, 3rd Rock from the Sun      <--thanks giancarlo
> > > >
> > > > Got Linux?  http://www.linuxmall.com
> > > > --
> > > > To unsubscribe: mail majordomo at ale.org with "unsubscribe
> > > ale" in message body.
> > >
> > > --
> > > Until later: Geoffrey         esoteric at denali.atlnet.com
> > >
> > > Microsoft != Innovation
> > > --
> > > To unsubscribe: mail majordomo at ale.org with "unsubscribe ale"
> > > in message body.
> > >
> 
> --
> Until later: Geoffrey		esoteric at denali.atlnet.com
> 
> Microsoft != Innovation
> --
> To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.
> 

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.