[ale] Linux via mindspring to AOL -> blackhole
Steve Tynor
tynor at atlanta.twr.com
Wed Sep 9 10:15:20 EDT 1998
Hi. I am running linux 2.0.29, sendmail 8.8.5, with mindspring as my
service provider. For the last several months, I have been unable to send
email to aol from my linux machine. I have had no problems sending mail
to any other isp providers; just aol (surprise). I have seen in other
situations, that aol will bounce messages if the reverse dns look-up
fails, so I'm pretty sure that isn't the problem as I do not receive any
bounce messages, but the mail just does not go through. The sendmail.cf
masquerade and domain names have been adjusted properly, as far as I can
tell. My sendmail.cf is appended at the end of this message.
Has any else had problems getting mail to aol? Or, do you see something
else I can/should do with the sendmail.cf? I've tried talking with
mindspring and aol without much success.
I'd appreciate any suggestions or info,
Laurie Tynor
lbtyno at mindspring.com
----------------------------------------------------------------------
#
# Copyright (c) 1983, 1995 Eric P. Allman
# Copyright (c) 1988, 1993
# The Regents of the University of California. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed by the University of
# California, Berkeley and its contributors.
# 4. Neither the name of the University nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
######################################################################
######################################################################
#####
##### SENDMAIL CONFIGURATION FILE
#####
##### built by root at darkstar on Fri Feb 7 17:48:44 CST 1997
##### in /tmp/sendmail-8.8.5/cf/cf
##### using /tmp/sendmail-8.8.5/cf/ as configuration include directory
#####
######################################################################
######################################################################
##### @(#)cfhead.m4 8.9 (Berkeley) 1/18/97 #####
##### @(#)cf.m4 8.24 (Berkeley) 8/16/95 #####
##### linux for smtp-only setup #####
##### @(#)linux.m4 8.2 (Berkeley) 8/21/93 #####
##### @(#)nouucp.m4 8.1 (Berkeley) 6/7/93 #####
##### @(#)always_add_domain.m4 8.1 (Berkeley) 6/7/93 #####
##### @(#)proto.m4 8.139 (Berkeley) 12/31/96 #####
# level 7 config file format
V7/Berkeley
##################
# local info #
##################
Cwlocalhost
# my official domain name
# ... define this only if sendmail cannot automatically determine your domain
#Dj$w.Foo.COM
Djatl.mindspring.com
CP.
# "Smart" relay host (may be null)
DS
# place to which unknown users should be forwarded
#Kuser user -m -a<>
#DLname_of_luser_relay
# operators that cannot be in local usernames (i.e., network indicators)
CO @ %
# a class with just dot (for identifying canonical names)
C..
# a class with just a left bracket (for identifying domain literals)
C[[
# Mailer table (overriding domains)
#Kmailertable dbm /etc/mailertable
# Domain table (adding domains)
#Kdomaintable dbm /etc/domaintable
# Generics table (mapping outgoing addresses)
#Kgenerics dbm /etc/genericstable
# Virtual user table (maps incoming users)
#Kvirtuser dbm /etc/virtusertable
# who I send unqualified names to (null means deliver locally)
DR
# who gets all local email traffic ($R has precedence for unqualified names)
DH
# dequoting map
Kdequote dequote
# class E: names that should be exposed as from this host, even if we masquerade
# class L: names that should be delivered locally, even if we have a relay
# class M: domains that should be converted to $M
#CL root
#CE root
CEroot
CMgromit.none
# who I masquerade as (null for no masquerading) (see also $=M)
DMatl.mindspring.com
# my name for error messages
DnMAILER-DAEMON
# Configuration version number
DZ8.8.5
###############
# Options #
###############
# strip message body to 7 bits on input?
O SevenBitInput=False
# 8-bit data handling
O EightBitMode=pass8
# wait for alias file rebuild (default units: minutes)
O AliasWait=10
# location of alias file
O AliasFile=/etc/aliases
# minimum number of free blocks on filesystem
O MinFreeBlocks=100
# maximum message size
#O MaxMessageSize=1000000
# substitution for space (blank) characters
O BlankSub=.
# avoid connecting to "expensive" mailers on initial submission?
O HoldExpensive=False
# checkpoint queue runs after every N successful deliveries
#O CheckpointInterval=10
# default delivery mode
O DeliveryMode=background
# automatically rebuild the alias database?
#O AutoRebuildAliases
# error message header/file
#O ErrorHeader=/etc/sendmail.oE
# error mode
#O ErrorMode=print
# save Unix-style "From_" lines at top of header?
#O SaveFromLine
# temporary file mode
O TempFileMode=0600
# match recipients against GECOS field?
#O MatchGECOS
# maximum hop count
#O MaxHopCount=17
# location of help file
O HelpFile=/usr/lib/sendmail.hf
# ignore dots as terminators in incoming messages?
#O IgnoreDots
# name resolver options
#O ResolverOptions=+AAONLY
# deliver MIME-encapsulated error messages?
O SendMimeErrors=True
# Forward file search path
O ForwardPath=$z/.forward.$w:$z/.forward
# open connection cache size
O ConnectionCacheSize=2
# open connection cache timeout
O ConnectionCacheTimeout=5m
# persistent host status directory
#O HostStatusDirectory=.hoststat
# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery
# use Errors-To: header?
O UseErrorsTo=False
# log level
O LogLevel=9
# send to me too, even in an alias expansion?
#O MeToo
# verify RHS in newaliases?
O CheckAliases=False
# default messages to old style headers if no special punctuation?
O OldStyleHeaders=True
# SMTP daemon options
#O DaemonPortOptions=Port=esmtp
# privacy flags
O PrivacyOptions=authwarnings
# who (if anyone) should get extra copies of error messages
#O PostMasterCopy=Postmaster
# slope of queue-only function
#O QueueFactor=600000
# queue directory
O QueueDirectory=/var/spool/mqueue
# timeouts (many of these)
#O Timeout.initial=5m
#O Timeout.connect=5m
#O Timeout.iconnect=5m
#O Timeout.helo=5m
#O Timeout.mail=10m
#O Timeout.rcpt=1h
#O Timeout.datainit=5m
#O Timeout.datablock=1h
#O Timeout.datafinal=1h
#O Timeout.rset=5m
#O Timeout.quit=2m
#O Timeout.misc=2m
#O Timeout.command=1h
#O Timeout.ident=30s
#O Timeout.fileopen=60s
O Timeout.queuereturn=5d
#O Timeout.queuereturn.normal=5d
#O Timeout.queuereturn.urgent=2d
#O Timeout.queuereturn.non-urgent=7d
O Timeout.queuewarn=4h
#O Timeout.queuewarn.normal=4h
#O Timeout.queuewarn.urgent=1h
#O Timeout.queuewarn.non-urgent=12h
#O Timeout.hoststatus=30m
# should we not prune routes in route-addr syntax addresses?
#O DontPruneRoutes
# queue up everything before forking?
O SuperSafe=True
# status file
O StatusFile=/etc/sendmail.st
# time zone handling:
# if undefined, use system default
# if defined but null, use TZ envariable passed in
# if defined and non-null, use that info
#O TimeZoneSpec=
# default UID (can be username or userid:groupid)
O DefaultUser=1:1
# list of locations of user database file (null means no lookup)
#O UserDatabaseSpec=/etc/userdb
# fallback MX host
#O FallbackMXhost=fall.back.host.net
# if we are the best MX host for a site, try it directly instead of config err
#O TryNullMXList
# load average at which we just queue messages
#O QueueLA=8
# load average at which we refuse connections
#O RefuseLA=12
# maximum number of children we allow at one time
#O MaxDaemonChildren=12
# maximum number of new connections per second
#O ConnectionRateThrottle=3
# work recipient factor
#O RecipientFactor=30000
# deliver each queued job in a separate process?
#O ForkEachJob
# work class factor
#O ClassFactor=1800
# work time factor
#O RetryFactor=90000
# shall we sort the queue by hostname first?
#O QueueSortOrder=priority
# minimum time in queue before retry
#O MinQueueAge=30m
# default character set
#O DefaultCharSet=iso-8859-1
# service switch file (ignored on Solaris, Ultrix, OSF/1, others)
#O ServiceSwitchFile=/etc/service.switch
# hosts file (normally /etc/hosts)
#O HostsFile=/etc/hosts
# dialup line delay on connection failure
#O DialDelay=10s
# action to take if there are no recipients in the message
#O NoRecipientAction=add-to-undisclosed
# chrooted environment for writing to files
#O SafeFileEnvironment=/arch
# are colons OK in addresses?
#O ColonOkInAddr
# how many jobs can you process in the queue?
#O MaxQueueRunSize=10000
# shall I avoid expanding CNAMEs (violates protocols)?
#O DontExpandCnames
# SMTP initial login message (old $e macro)
O SmtpGreetingMessage=$j Sendmail $v/$Z; $b
# UNIX initial From header format (old $l macro)
O UnixFromLine=From $g $d
# delimiter (operator) characters (old $o macro)
O OperatorChars=.:%@!^/[]+
# shall I avoid calling initgroups(3) because of high NIS costs?
#O DontInitGroups
# are group-writable :include: and .forward files (un)trustworthy?
#O UnsafeGroupWrites
# where do errors that occur when sending errors get sent?
#O DoubleBounceAddress
# what user id do we assume for the majority of the processing?
#O RunAsUser=sendmail
###########################
# Message precedences #
###########################
Pfirst-class=0
Pspecial-delivery=100
Plist=-30
Pbulk=-60
Pjunk=-100
#####################
# Trusted users #
#####################
# this is equivalent to setting class "t"
#Ft/etc/sendmail.ct
Troot
Tdaemon
#########################
# Format of headers #
#########################
H?P?Return-Path: <$g>
HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
$.by $j ($v/$Z)$?r with $r$. id $i$?u
for $u; $|;
$.$b
H?D?Resent-Date: $a
H?D?Date: $a
H?F?Resent-From: $?x$x <$g>$|$g$.
H?F?From: $?x$x <$g>$|$g$.
H?x?Full-Name: $x
# HPosted-Date: $a
# H?l?Received-Date: $b
H?M?Resent-Message-Id: <$t.$i@$j>
H?M?Message-Id: <$t.$i@$j>
#
######################################################################
######################################################################
#####
##### REWRITING RULES
#####
######################################################################
######################################################################
############################################
### Ruleset 3 -- Name Canonicalization ###
############################################
S3
# handle null input (translate to <@> special case)
R$@ $@ <@>
# strip group: syntax (not inside angle brackets!) and trailing semicolon
R$* $: $1 <@> mark addresses
R$* < $* > $* <@> $: $1 < $2 > $3 unmark <addr>
R@ $* <@> $: @ $1 unmark @host:...
R$* :: $* <@> $: $1 :: $2 unmark node::addr
R:include: $* <@> $: :include: $1 unmark :include:...
R$* [ $* : $* ] <@> $: $1 [ $2 : $3 ] unmark IPv6 addrs
R$* : $* [ $* ] $: $1 : $2 [ $3 ] <@> remark if leading colon
R$* : $* <@> $: $2 strip colon if marked
R$* <@> $: $1 unmark
R$* ; $: $1 strip trailing semi
# null input now results from list:; syntax
R$@ $@ :; <@>
# strip angle brackets -- note RFC733 heuristic to get innermost item
R$* $: < $1 > housekeeping <>
R$+ < $* > < $2 > strip excess on left
R< $* > $+ < $1 > strip excess on right
R<> $@ < @ > MAIL FROM:<> case
R< $+ > $: $1 remove housekeeping <>
# make sure <@a, at b, at c:user at d> syntax is easy to parse -- undone later
R@ $+ , $+ @ $1 : $2 change all "," to ":"
# localize and dispose of route-based addresses
R@ $+ : $+ $@ $>96 < @$1 > : $2 handle <route-addr>
# find focus for list syntax
R $+ : $* ; @ $+ $@ $>96 $1 : $2 ; < @ $3 > list syntax
R $+ : $* ; $@ $1 : $2; list syntax
# find focus for @ syntax addresses
R$+ @ $+ $: $1 < @ $2 > focus on domain
R$+ < $+ @ $+ > $1 $2 < @ $3 > move gaze right
R$+ < @ $+ > $@ $>96 $1 < @ $2 > already canonical
# do some sanity checking
R$* < @ $* : $* > $* $1 < @ $2 $3 > $4 nix colons in addrs
# if we have % signs, take the rightmost one
R$* % $* $1 @ $2 First make them all @s.
R$* @ $* @ $* $1 % $2 @ $3 Undo all but the last.
R$* @ $* $@ $>96 $1 < @ $2 > Insert < > and finish
# else we must be a local name
R$* $@ $>96 $1
################################################
### Ruleset 96 -- bottom half of ruleset 3 ###
################################################
S96
# handle special cases for local names
R$* < @ localhost > $* $: $1 < @ $j . > $2 no domain at all
R$* < @ localhost . $m > $* $: $1 < @ $j . > $2 local domain
R$* < @ [ $+ ] > $* $: $1 < @@ [ $2 ] > $3 mark [a.b.c.d]
R$* < @@ $=w > $* $: $1 < @ $j . > $3 self-literal
R$* < @@ $+ > $* $@ $1 < @ $2 > $3 canon IP addr
# look up domains in the domain table
#R$* < @ $+ > $* $: $1 < @ $(domaintable $2 $) > $3
# pass to name server to make hostname canonical
R$* < @ $* $~P > $* $: $1 < @ $[ $2 $3 $] > $4
# local host aliases and pseudo-domains are always canonical
R$* < @ $=w > $* $: $1 < @ $2 . > $3
R$* < @ $j > $* $: $1 < @ $j . > $2
R$* < @ $* $=M > $* $: $1 < @ $2 $3 . > $4
R$* < @ $* $=P > $* $: $1 < @ $2 $3 . > $4
R$* < @ $* . . > $* $1 < @ $2 . > $3
##################################################
### Ruleset 4 -- Final Output Post-rewriting ###
##################################################
S4
R$* <@> $@ handle <> and list:;
# strip trailing dot off possibly canonical name
R$* < @ $+ . > $* $1 < @ $2 > $3
# eliminate internal code -- should never get this far!
R$* < @ *LOCAL* > $* $1 < @ $j > $2
# externalize local domain info
R$* < $+ > $* $1 $2 $3 defocus
R@ $+ : @ $+ : $+ @ $1 , @ $2 : $3 <route-addr> canonical
R@ $* $@ @ $1 ... and exit
# delete duplicate local names
R$+ % $=w @ $=w $1 @ $2 u%host at host => u at host
##############################################################
### Ruleset 97 -- recanonicalize and call ruleset zero ###
### (used for recursive calls) ###
##############################################################
S97
R$* $: $>3 $1
R$* $@ $>0 $1
######################################
### Ruleset 0 -- Parse Address ###
######################################
S0
R<@> $#local $: <@> special case error msgs
R$* : $* ; <@> $#error $@ 5.1.3 $: "list:; syntax illegal for recipient addresses"
R<@ $+> $#error $@ 5.1.1 $: "user address required"
R$* $: <> $1
R<> $* < @ [ $+ ] > $* $1 < @ [ $2 ] > $3
R<> $* <$* : $* > $* $#error $@ 5.1.1 $: "colon illegal in host name part"
R<> $* $1
R$* < @ . $* > $* $#error $@ 5.1.2 $: "invalid host name"
# handle numeric address spec
R$* < @ [ $+ ] > $* $: $>98 $1 < @ [ $2 ] > $3 numeric internet spec
R$* < @ [ $+ ] > $* $#esmtp $@ [$2] $: $1 < @ [$2] > $3 still numeric: send
# now delete the local info -- note $=O to find characters that cause forwarding
R$* < @ > $* $@ $>97 $1 user@ => user
R< @ $=w . > : $* $@ $>97 $2 @here:... -> ...
R$- < @ $=w . > $: $(dequote $1 $) < @ $2 . > dequote "foo"@here
R< @ $+ > $#error $@ 5.1.1 $: "user address required"
R$* $=O $* < @ $=w . > $@ $>97 $1 $2 $3 ... at here -> ...
# handle local hacks
R$* $: $>98 $1
# handle virtual users
#R$+ < @ $=w . > $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
#R< @ > $+ < @ $+ . > $: < $(virtuser @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
#R< @ > $+ $: $1
#R< error : $- $+ > $* $#error $@ $( dequote $1 $) $: $2
#R< $+ > $+ < @ $+ > $: $>97 $1
# short circuit local delivery so forwarded email works
#R$+ . USENET < @ $=w . > $#usenet $: $1 handle usenet specially
R$=L < @ $=w . > $#local $: @ $1 special local names
R$+ < @ $=w . > $#local $: $1 regular local name
# not local -- try mailer table lookup
#R$* <@ $+ > $* $: < $2 > $1 < @ $2 > $3 extract host name
#R< $+ . > $* $: < $1 > $2 strip trailing dot
#R< $+ > $* $: < $(mailertable $1 $) > $2 lookup
#R< $~[ : $+ > $* $>95 < $1 : $2 > $3 check -- resolved?
#R< $+ > $* $: $>90 <$1> $2 try domain
# resolve fake top level domains by forwarding to other hosts
# pass names that still have a host to a smarthost (if defined)
R$* < @ $* > $* $: $>95 < $S > $1 < @ $2 > $3 glue on smarthost name
# deal with other remote names
R$* < @$* > $* $#esmtp $@ $2 $: $1 < @ $2 > $3 user at host.domain
# if this is quoted, strip the quotes and try again
R$+ $: $(dequote $1 $) strip quotes
R$+ $=O $+ $@ $>97 $1 $2 $3 try again
# handle locally delivered names
R$=L $#local $: @ $1 special local names
R$+ $#local $: $1 regular local names
###########################################################################
### Ruleset 5 -- special rewriting after aliases have been expanded ###
###########################################################################
S5
# deal with plussed users so aliases work nicely
R$+ + * $#local $@ $&h $: $1
R$+ + $* $#local $@ $2 $: $1 + *
# prepend an empty "forward host" on the front
R$+ $: <> $1
# send unrecognized local users to a relay host
#R< > $+ + $* $: < $L . > $( user $1 $) + $2
#R< > $+ $: < $L . > $( user $1 $) look up user
#R< $* > $+ <> $* $: < > $2 $3 found; strip $L
#R< $* . > $+ $: < $1 > $2 strip extra dot
# handle plussed local names
R< > $+ + $* $#local $@ $2 $: $1
# see if we have a relay or a hub
R< > $+ $: < $H > $1 try hub
R< > $+ $: < $R > $1 try relay
R< > $+ $@ $1 nope, give up
R< local : $* > $* $: $>95 < local : $1 > $2 no host extension
R< error : $* > $* $: $>95 < error : $1 > $2 no host extension
R< $- : $+ > $+ $: $>95 < $1 : $2 > $3 < @ $2 >
R< $+ > $+ $@ $>95 < $1 > $2 < @ $1 >
###################################################################
### Ruleset 90 -- try domain part of mailertable entry ###
###################################################################
S90
#R$* <$- . $+ > $* $: $1$2 < $(mailertable .$3 $@ $1$2 $@ $2 $) > $4
#R$* <$~[ : $+ > $* $>95 < $2 : $3 > $4 check -- resolved?
#R$* < . $+ > $* $@ $>90 $1 . <$2> $3 no -- strip & try again
#R$* < $* > $* $: < $(mailertable . $@ $1$2 $) > $3 try "."
#R< $~[ : $+ > $* $>95 < $1 : $2 > $3 "." found?
#R< $* > $* $@ $2 no mailertable match
###################################################################
### Ruleset 95 -- canonify mailer:[user@]host syntax to triple ###
###################################################################
S95
R< > $* $@ $1 strip off null relay
R< error : $- $+ > $* $#error $@ $( dequote $1 $) $: $2
R< local : $* > $* $>CanonLocal < $1 > $2
R< $- : $+ @ $+ > $*<$*>$* $# $1 $@ $3 $: $2<@$3> use literal user
R< $- : $+ > $* $# $1 $@ $2 $: $3 try qualified mailer
R< $=w > $* $@ $2 delete local host
R< $+ > $* $#relay $@ $1 $: $2 use unqualified mailer
###################################################################
### Ruleset CanonLocal -- canonify local: syntax ###
###################################################################
SCanonLocal
# strip trailing dot from any host name that may appear
R< $* > $* < @ $* . > $: < $1 > $2 < @ $3 >
# handle local: syntax -- use old user, either with or without host
R< > $* < @ $* > $* $#local $@ $1@$2 $: $1
R< > $+ $#local $@ $1 $: $1
# handle local:user at host syntax -- ignore host part
R< $+ @ $+ > $* $: < $1 > $3
# handle local:user syntax
R< $+ > $* <@ $* > $* $#local $@ $2@$3 $: $1
R< $+ > $* $#local $@ $2 $: $1
###################################################################
### Ruleset 93 -- convert header names to masqueraded form ###
###################################################################
S93
# handle generics database
#R$+ < @ $=G . > $: < $1@$2 > $1 < @ $2 . > @ mark
#R$+ < @ *LOCAL* > $: < $1@$j > $1 < @ *LOCAL* > @ mark
#R< $+ > $+ < $* > @ $: < $(generics $1 $: $) > $2 < $3 >
#R< > $+ < @ $+ > $: < $(generics $1 $: $) > $1 < @ $2 >
#R< $* @ $* > $* < $* > $@ $>3 $1 @ $2 found qualified
#R< $+ > $* < $* > $: $>3 $1 @ *LOCAL* found unqualified
#R< > $* $: $1 not found
# special case the users that should be exposed
R$=E < @ *LOCAL* > $@ $1 < @ $j . > leave exposed
R$=E < @ $=M . > $@ $1 < @ $2 . >
R$=E < @ $=w . > $@ $1 < @ $2 . >
# handle domain-specific masquerading
R$* < @ $=M . > $* $: $1 < @ $2 . @ $M > $3 convert masqueraded doms
R$* < @ $=w . > $* $: $1 < @ $2 . @ $M > $3
R$* < @ *LOCAL* > $* $: $1 < @ $j . @ $M > $2
R$* < @ $+ @ > $* $: $1 < @ $2 > $3 $M is null
R$* < @ $+ @ $+ > $* $: $1 < @ $3 . > $4 $M is not null
###################################################################
### Ruleset 94 -- convert envelope names to masqueraded form ###
###################################################################
S94
#R$+ $@ $>93 $1
R$* < @ *LOCAL* > $* $: $1 < @ $j . > $2
###################################################################
### Ruleset 98 -- local part of ruleset zero (can be null) ###
###################################################################
S98
#
######################################################################
######################################################################
#####
##### MAILER DEFINITIONS
#####
######################################################################
######################################################################
##################################################
### Local and Program Mailer specification ###
##################################################
##### @(#)local.m4 8.23 (Berkeley) 5/31/96 #####
Mlocal, P=/usr/bin/procmail, F=lsDFMAw5:/|@qShP, S=10/30, R=20/40,
T=DNS/RFC822/X-Unix,
A=procmail -a $h -d $u
Mprog, P=/bin/sh, F=lsDFMoqeu9, S=10/30, R=20/40, D=$z:/,
T=X-Unix,
A=sh -c $u
#
# Envelope sender rewriting
#
S10
R<@> $n errors to mailer-daemon
R$+ $: $>50 $1 add local domain if needed
R$* $: $>94 $1 do masquerading
#
# Envelope recipient rewriting
#
S20
R$+ < @ $* > $: $1 strip host part
#
# Header sender rewriting
#
S30
R<@> $n errors to mailer-daemon
R$+ $: $>50 $1 add local domain if needed
R$* $: $>93 $1 do masquerading
#
# Header recipient rewriting
#
S40
R$+ $: $>50 $1 add local domain if needed
#R$* $: $>93 $1 do all-masquerading
#
# Common code to add local domain name (only if always-add-domain)
#
S50
R$* < @ $* > $* $@ $1 < @ $2 > $3 already fully qualified
R$+ $@ $1 < @ *LOCAL* > add local qualification
#####################################
### SMTP Mailer specification ###
#####################################
##### @(#)smtp.m4 8.33 (Berkeley) 7/9/96 #####
Msmtp, P=[IPC], F=mDFMuX, S=11/31, R=21, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=IPC $h
Mesmtp, P=[IPC], F=mDFMuXa, S=11/31, R=21, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=IPC $h
Msmtp8, P=[IPC], F=mDFMuX8, S=11/31, R=21, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=IPC $h
Mrelay, P=[IPC], F=mDFMuXa8, S=11/31, R=61, E=\r\n, L=2040,
T=DNS/RFC822/SMTP,
A=IPC $h
#
# envelope sender rewriting
#
S11
R$+ $: $>51 $1 sender/recipient common
R$* :; <@> $@ list:; special case
R$* $: $>61 $1 qualify unqual'ed names
R$+ $: $>94 $1 do masquerading
#
# envelope recipient rewriting --
# also header recipient if not masquerading recipients
#
S21
R$+ $: $>51 $1 sender/recipient common
R$+ $: $>61 $1 qualify unqual'ed names
#
# header sender and masquerading header recipient rewriting
#
S31
R$+ $: $>51 $1 sender/recipient common
R:; <@> $@ list:; special case
# do special header rewriting
R$* <@> $* $@ $1 <@> $2 pass null host through
R< @ $* > $* $@ < @ $1 > $2 pass route-addr through
R$* $: $>61 $1 qualify unqual'ed names
R$+ $: $>93 $1 do masquerading
#
# convert pseudo-domain addresses to real domain addresses
#
S51
# pass <route-addr>s through
R< @ $+ > $* $@ < @ $1 > $2 resolve <route-addr>
# output fake domains as user%fake at relay
#
# common sender and masquerading recipient rewriting
#
S61
R$* < @ $* > $* $@ $1 < @ $2 > $3 already fully qualified
R$+ $@ $1 < @ *LOCAL* > add local qualification
#
# relay mailer header masquerading recipient rewriting
#
S71
R$+ $: $>61 $1
R$+ $: $>93 $1
More information about the Ale
mailing list