[ale] Can Bad Video Settings Fry LCD Monitors?
David Stephens
linuxrootuser at gmail.com
Thu Oct 31 08:46:52 EDT 2013
I work in a small electronics repair shop here in Atlanta. As of late we
are seeing a lot of gear suffering from failed capacitors, most are smt
devices. It is one thing to have failed capacitors in a home
computer/laptop since generally people upgrade systems on a regular basis
as speeds/capacities increase.
Musical instruments are another story. People don't want to "upgrade" an
electric piano that cost $5,000 to $15,000, every five years. The only
solution is a complete re-cap job. The process is not difficult, but it is
time consuming. Use Chip Quik to remove the failed capacitor, clean the
trace pads of all corrosion, inspect with a microscope, position new
capacitor, solder new capacitor and re-inspect, repeat for the remaining 99
capacitors.
I suspect that there are more than a few servers running in data centers
that are 2002 - 2005 vintage machines with the same failing capacitors on
the motherboards. The effects of these failing capacitors will most likely
be attributed to "bit rot". Modern error correction can reduce the bit
rot, however, when bit rot is generated by noise on the bus data and bus
lines and supply lines feeding the error correcting circuits there isn't
much that can correct the problem.
We recently recapped several old IBM workstations, we're cheap and tend to
hold on to shop gear, until the magic smoke escapes. The recaps worked:
boot times returned to like new speeds, the systems actually shutdown when
you asked them too, and the blue screens of death and kernel panics went
away.
http://en.wikipedia.org/wiki/Capacitor_plague
On Wed, Oct 30, 2013 at 9:46 PM, Ron Frazier (ALE) <
atllinuxenthinfo at techstarship.com> wrote:
> Hi all,
>
> I just had a wild thought after reading an article in computer power user
> magazine about liquid electrolytic versus solid electrolyte capacitors. As
> you may know, many modern motherboards use Japanese solid electrolytic
> capacitors to increase quality and reliability.
>
> I already knew that. What I didn't know is that, around 2002, the
> industry started experiencing waves of returns / complaints about defective
> motherboards due to a bad batch of capacitors with unstable electrolyte
> compounds. This caused a great deal of trouble above and beyond the normal
> failure rate, and severely disrupted the industry.
>
>
> http://www.computerpoweruser.com/DigitalIssues/ComputerPowerUser/CP____1311__/
>
> Like I said, long shot, wild thought. But, maybe, if your monitors are
> several years old and of similar vintage, they're all starting to
> experience premature death. This could be an outside factor that could
> affect many units with nothing obviously in common but time of manufacture.
> The article says this affected monitors, network switches, a/v equipment,
> and other things.
>
> In any case, I thought it was interesting.
>
> Sincerely,
>
> Ron
>
>
>
> Aaron Ruscetta <arxaaron at gmail.com> wrote:
>
> >RESOLUTION:
> >(pun in tended)
> >
> >Thanks to everyone for the feedback. I had tested these monitors
> >with known good sources, both VGA and (where supported on the
> >Veiwsonic) DVI to confirm they were dead before asking here.
> >Sorry I didn't make that clear.
> >
> >The replies confirmed my understanding that the circuitry on any
> >newer LCD monitor would simply reject any out of spec signals,
> >but the supporting opinions were extremely helpful. I'll just throw
> >another spare monitor at my housemate's system and hope it
> >lasts for a while. Embarrassingly, I still have 3 more 17" and
> >2 ea. 15" units that he can choose from, in addition to an old
> >school Mac G3 era monitor.
> >
> >in peace,
> >aaron
> >
> >
> >[-: scissors of courteous file size awareness :-]
> >
> >
>
>
>
> --
>
> Sent from my Android Acer A500 tablet with bluetooth keyboard and K-9 Mail.
> Please excuse my potential brevity if I'm typing on the touch screen.
>
> (PS - If you email me and don't get a quick response, you might want to
> call on the phone. I get about 300 emails per day from alternate energy
> mailing lists and such. I don't always see new email messages very
> quickly.)
>
> Ron Frazier
> 770-205-9422 (O) Leave a message.
> linuxdude AT techstarship.com
> Litecoin: LZzAJu9rZEWzALxDhAHnWLRvybVAVgwTh3
> Bitcoin: 15s3aLVsxm8EuQvT8gUDw3RWqvuY9hPGUU
>
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo
>
--
"We cannot solve our problems with the same thinking we used when we
created them. "
-- Albert Einstein
<http://www.brainyquote.com/quotes/quotes/a/alberteins121993.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.ale.org/pipermail/ale/attachments/20131031/7361a12e/attachment.html>
More information about the Ale
mailing list