[ale] USB reset error in dmesg

Rich Faulkner rfaulkner at Tux86.org
Sat Jun 16 04:21:36 EDT 2012


Attaching a PS/2 mouse and keyboard resolve the error but by only
removing the device(s) that are causing the problem.  That is not a
solution as all USB have to be working.  I have recommended that the OS
be migrated to 6.x but don't know that this will be accepted.  Another
find was setting the BIOS to support multi-monitor mode (an interesting
connection); the error is not induced.  Only in single-monitor mode does
the USB mouse/keyboard go bugger.  So there is a BIOS connection here
for resource allocation that interacts with EHCI driver (or USB driver)
and the function of low-speed USB device(s).  

In the end, the mouse and keyboard are constantly powering-up and down.
Looks like they fail and reinitialize; then fail; then initialize.  Up,
down, up down...sand-a-floor; side-to-side...you get my drift...


On Fri, 2012-06-15 at 17:13 -0400, Jim Kinney wrote:

> Oh. good catch! I have not had the chance to look at "the piles" here
> 
> So disconnecting the mouse will stop the failures?
> 
> 
> On Fri, Jun 15, 2012 at 5:09 PM, Rich Faulkner <rfaulkner at tux86.org>
> wrote:
> 
>         The plot thickens:  found the MS USB mouse is at issue...
>         
>         - The low speed USB device using ehci_hcd and address 3 is the
>         Microsoft 3-Button Mouse as / class/ input/ input0 on
>         usb-0000:00:1d.0-1.1
>         
>         - dmesg indicates:  PCI: cache line size of 32 is not
>         supported by device 0000:00:1d.0
>         
>         - I can see the USB 2.0, and EHCI 1.00 driver started for this
>         device as well
>         
>         Observation of the mouse shows power blinking-off
>         periodically.  Keyboard (USB) acts like it has sticking keys
>         periodically.  I suspect this will goof-up most anything
>         attached to the USB bus.
>         
>         I have been trying some kernel parameters to grub.conf but no
>         improvement thus far to the mouse.  (Only got rid of an issue
>         concerning mtrr).  Another hint in this is that when you set
>         the BIOS for multi-monitor support the problem goes away.
>         (Yes, I know we could set that and leave it but that's not the
>         point.  Need to find the fix for this other than a workaround
>         like 6.x or the BIOS setting).
>         
>         TIA.......Rich
>         
>         
>         
>         
>         
>         > > Chipset is the Intel C206 (PCH).   Datasheet for the SHB
>         > > is here:
>         > > http://www.trentontechnology.com/downloads/datasheets/trenton_tsb7053_productdatasheet.pdf 
>         
>         
>         
>         > > >         I have come across a problem with RHEL 5.x
>         > > >         family where I am getting the following output
>         > > >         in dmesg:
>         > > >         
>         > > >         "usb 2-1.1: reset low speed USB device using
>         > > >         ehci_hcd and address 3"
>         > > >         
>         > > >         My USB attached keyboard and mouse do not
>         > > >         function properly (lag and inaccurate output).
>         > > >         It looks like there is an issue in the system
>         > > >         support of USB but it only seems to exist in 5.x
>         > > >         family.  Once tested in 6.x it all works.
>         > > >         (Testing with both CentOS and Scientific Linux -
>         > > >         live and installed samples)
>         > > >         
>         > > >         I am going through the debug output manually but
>         > > >         thought I'd shoot this over here for a more
>         > > >         experienced perspective from those with grayer
>         > > >         beards than I...
>         > > >         
>         > > >         TIA........Rich 
>         
>         
>         _______________________________________________
>         Ale mailing list
>         Ale at ale.org
>         http://mail.ale.org/mailman/listinfo/ale
>         See JOBS, ANNOUNCE and SCHOOLS lists at
>         http://mail.ale.org/mailman/listinfo
>         
> 
> 
> 
> 
> -- 
> -- 
> James P. Kinney III
> 
> Every time you stop a school, you will have to build a jail. What you
> gain at one end you lose at the other. It's like feeding a dog on his
> own tail. It won't fatten the dog.
> - Speech 11/23/1900 Mark Twain
> 
> http://electjimkinney.org
> http://heretothereideas.blogspot.com/
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
> See JOBS, ANNOUNCE and SCHOOLS lists at
> http://mail.ale.org/mailman/listinfo


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.ale.org/pipermail/ale/attachments/20120616/6a2bed00/attachment.html 


More information about the Ale mailing list