[ale] Issues with NTP - synchronizes, then falls behind...

[Jim Kinney]

You need a new motherboard. Or some time with a soldering rig and a
new clock chip.

When the clock is drifting that fast ntp refuses to update it.
Multiple time jumps cause problems when they are greater than a second
or two.

On Sun, Jul 26, 2009 at 11:57 AM, Chris Woodfield<rekoil at semihuman.com> wrote:
> Hi,
>
> Having a major problem with a server that's running Debian 4.0 - can't
> seem to keep the clock in sync.
>
> I believe that the root cause is that my motherboard's hardware clock
> is running slow, but I'm trusting that ntpd should correct for that -
> which it is not.
>
> When I start ntp up, it connects to multiple pool.ntp.org servers, and
> appears to properly synch up the internal clock. However, within a few
> minutes, that clock is several seconds behind - what's more is that
> ntp seems to detect this, as shown in the offset field of ntpq -p, but
> doesn't seem interesting in correcting it.
>
> As the diag shows below, I'm skewing a full 10 seconds within 10
> minutes - is this just too far of a delta for ntp to be able to work
> with? If so, is there a config option to resolve this?
>
> Here's a quick shell script I wrote to demonstrate the problem -
> 192.168.0.155 is a Mac that syncs to time.apple.com.
>
> --
> echo -n "Initial Localtime: "
> date
> echo -n "Initial RemoteTime: "
> ssh 192.168.0.155 date
> sudo /etc/init.d/ntp restart
> for VAR in 1 2 3 4 5
> do
>  sleep 90
>  ntpq -p
>  echo -n "Localtime: "
>  date
>  echo -n "Remotetime: "
>  ssh 192.168.0.155 date
> done
> --
>
> And the output - note that on first run, it goes from 6 seconds behind
> before ntp restart to ~2 seconds, but then drifts out to a full 10
> seconds behind at the end of the 450 seconds it takes the script to run.
>
> rekoil at tino:~$ sh ntp_run
> Initial Localtime: Sun Jul 26 11:45:34 EDT 2009
> Initial RemoteTime: Sun Jul 26 11:45:40 EDT 2009
> Stopping NTP server: ntpd.
> Starting NTP server: ntpd.
>      remote           refid      st t when poll reach   delay
> offset  jitter
> =
> =
> =
> =
> =
> =
> ========================================================================
>  host2.kingrst.c 173.14.47.149    2 u   41   64    1   50.214
> 844.062   0.001
>  mainframe.cynac 216.218.254.202  2 u   27   64    1   31.627
> 1142.33   0.001
> Localtime: Sun Jul 26 11:47:13 EDT 2009
> Remotetime: Sun Jul 26 11:47:15 EDT 2009
>      remote           refid      st t when poll reach   delay
> offset  jitter
> =
> =
> =
> =
> =
> =
> ========================================================================
>  host2.kingrst.c 173.14.47.149    2 u    3   64    7   49.684
> 2195.19 1354.11
>  mainframe.cynac 216.218.254.202  2 u   51   64    3   31.627
> 1142.33 1393.21
> Localtime: Sun Jul 26 11:48:43 EDT 2009
> Remotetime: Sun Jul 26 11:48:47 EDT 2009
>      remote           refid      st t when poll reach   delay
> offset  jitter
> =
> =
> =
> =
> =
> =
> ========================================================================
>  host2.kingrst.c 173.14.47.149    2 u   28   64   17   49.684
> 2195.19 1922.28
>  mainframe.cynac 216.218.254.202  2 u   14   64   17   31.310
> 3886.57 1925.79
> Localtime: Sun Jul 26 11:50:13 EDT 2009
> Remotetime: Sun Jul 26 11:50:19 EDT 2009
>      remote           refid      st t when poll reach   delay
> offset  jitter
> =
> =
> =
> =
> =
> =
> ========================================================================
>  host2.kingrst.c 173.14.47.149    2 u   52   64   37   49.684
> 2195.19 2647.40
>  mainframe.cynac 216.218.254.202  2 u   38   64   37   31.310
> 3886.57 2153.12
> Localtime: Sun Jul 26 11:51:43 EDT 2009
> Remotetime: Sun Jul 26 11:51:51 EDT 2009
>      remote           refid      st t when poll reach   delay
> offset  jitter
> =
> =
> =
> =
> =
> =
> ========================================================================
>  host2.kingrst.c 173.14.47.149    2 u   16   64  177   48.996
> 8992.49 5287.44
>  mainframe.cynac 216.218.254.202  2 u    2   64  177   31.310
> 3886.57 3275.18
> Localtime: Sun Jul 26 11:53:14 EDT 2009
> Remotetime: Sun Jul 26 11:53:24 EDT 2009
>
> Relevant config stuff:
>
> root     22986  0.0  0.1   5492  1692 ?        Ss   11:45   0:00 /usr/
> sbin/ntpd -p /var/run/ntpd.pid -u 0:0 -g
> By default Debian 5 runs ntp as UID ntp, changed to root to eliminate
> potential permissions issues...
>
> from ntp.conf:
> server 0.debian.pool.ntp.org iburst dynamic
> server 1.debian.pool.ntp.org iburst dynamic
>
> Thanks,
>
> -Chris
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale
>



-- 
-- 
James P. Kinney III
Actively in pursuit of Life, Liberty and Happiness