[ale] LG Slim USB and UNR Issue

[Chris Fowler]

I would try only this device and see if it works.  You could be not
providing enough current to this device since you have so many other
devices.  

If it does work as a singl device I would suggest going to eBay or Frys
and getting a *powered* USB hub.  Make sure it comes with a brick.

Typically 4 port hubs are not powered and hubs with more than 4 ports
are.

On Tue, 2009-07-21 at 17:00 -0400, Omar Chanouha wrote:
> I am trying to get the LG gp08 USB drive to work with UNR, but
> whenever I plug it in this is what dmesg is spitting out:
> 
> [ 1143.440034] usb 3-2: new full speed USB device using uhci_hcd and address 7
> [ 1143.560035] usb 3-2: device descriptor read/64, error -71
> [ 1143.784054] usb 3-2: device descriptor read/64, error -71
> [ 1144.000032] usb 3-2: new full speed USB device using uhci_hcd and address 8
> [ 1144.120032] usb 3-2: device descriptor read/64, error -71
> [ 1144.344616] usb 3-2: device descriptor read/64, error -71
> [ 1144.560032] usb 3-2: new full speed USB device using uhci_hcd and address 9
> [ 1144.968043] usb 3-2: device not accepting address 9, error -71
> [ 1145.080033] usb 3-2: new full speed USB device using uhci_hcd and address 10
> [ 1145.488033] usb 3-2: device not accepting address 10, error -71
> [ 1145.488064] hub 3-0:1.0: unable to enumerate USB device on port 2
> 
> Can anyone shed some light on this for me? What is error -71? Could it
> be that there is a non-generic driver I need to install? SOme people
> have said it was plug n play for them.
> 
> Also, the device is USB powered(extra cord, so it takes 2 USB slots).
> I have 8 USB ports and they are all full. Could this be affecting
> anything? I need all the peripherals, so that would suck.
> 
> Thanks,
> 
> -O
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://mail.ale.org/mailman/listinfo/ale