[ale] oops.. mounted my ext3 partition as ext2

James P. Kinney III jkinney at localnetsolutions.com
Tue Sep 18 20:46:56 EDT 2007


It will not be a problem unless you yank the power out before a write is
complete. Just run sync twice (never hurts) before you unmount and then
remount next time as ext3.

On Tue, 2007-09-18 at 19:07 -0400, Brian Schenken wrote:
> Hi folks,
> 
> I just added an extra hard drive to one of our servers, created an
> ext3 partition, mounted it, copied over a huge amount of important
> data, and then noticed I mounted my ext3 partition as ext2.  (I blame
> the fat fingers) 
> 
> As far as I know, all this really does is disable journaling -  as
> ext3 is backwards compatible.  So... I should be able to remount the
> partition as ext3 and finish my beer.  But... some voice in my head
> (that was apparently off duty when I left a mistake in my fstab) is
> telling me I should make sure I don't take a risk with this data.  
> 
> So am I right?  Is swapping back and forth between mounting (and
> writing to) an ext3 partition as ext3 or ext2 - harmless?
> 
> Thanks muchly,
> Brian
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean. 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
-- 
James P. Kinney III          
CEO & Director of Engineering 
Local Net Solutions,LLC        
770-493-8244                    
http://www.localnetsolutions.com

GPG ID: 829C6CA7 James P. Kinney III (M.S. Physics)
<jkinney at localnetsolutions.com>
Fingerprint = 3C9E 6366 54FC A3FE BA4D 0659 6190 ADC3 829C 6CA7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part




More information about the Ale mailing list