[ale] RAM upgrade question

Courtney Thomas cc.thomas at earthlink.net
Mon Jun 26 12:27:34 EDT 2006


Thank you for your help.

I just checked the BIOS and there is no CL manual setting and the BIOS 
reports:   Level 2 Cache - 512 KB

So, am I safe to assume that CL3 will work, in that all RAM [512MB] will 
be replaced with CL3, the maximum possible in this machine. It currently 
only has 128MB and is slowwwwwwwww   :-)

Appreciatively,
Courtney




JK wrote:
> James P. Kinney III wrote:
> 
> 
>>On Sun, 2006-06-25 at 16:39 -0500, Courtney Thomas wrote:
>> 
>>
>>
>>>I need to increase the RAM capacity from 128 to 512MB in a portable.
>>>
>>>I've located some SODIMMs, whatever that means,
>>>
> 
> Small Outline Dual Inline Memory Module, IIRC. "SO"
> refers to the form factor.
> 
> 
>>>that appear to match the 
>>>docs on my machine's RAM requirement, except that said modules are CL3, 
>>>not CL2.
>>>
>>>Of what significance is this ?
>>>   
>>>
>>
>>If you are replacing CL2 with CL3, it should work OK as long as the rest
>>of the parameters match up. Don't mix the two types or else the RAM will
>>not work. The CLx is a timing designator. I can't recall whether it is
>>refresh rate or write rate. The main thing is that all the RAM must be
>>the same type.
>>
> 
> And you may need to adjust your BIOS for the lower CL (cache
> latency) setting. Some BIOSes require CL to be set manually.
> Some allow different CL settings per bank, IIRC.
> 
> -- JK
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 



More information about the Ale mailing list