[ale] Limewire plays but no sound, huh ?

[Charles Shapiro]

Also take a look at your mixer and experiment with the different sub
miniature phono plugs in your Audigy card. I had a terrible wrassle with
mine a while back 'til I figured out that I was in the Wrong Hole.

-- CHS


On 12/19/06, J. D. <jdonline at gmail.com> wrote:
>
>
> On 12/19/06, Courtney Thomas <courtneycthomas at bellsouth.net> wrote:
> >
> > I've got a Creative Soundblaster Live! 5.1 [Audigy] rig connected to
> > their card and am trying to play some tunes from Limewire, which
> > formerly played [couple of years ago], but now the GUI shows them
> > playing but no sound comes out.
> >
> > I downloaded/installed the Linux software when I got the hardware but
> > have lost the included manufactuer docs so don't know what's wrong. It
> > worked when originally installed.
> >
> > Loaded modules that pertain, as best I remember are: emu10k1,
> > via82cxxx_audio uart401, sound, soundcore.
> >
> > What might be wrong and how do I cure it, please ?
> >
> > Thanks again,
> >
> > Courtney
>
>
>
> Hey Courtney,
>
>      I believe the via82cxxx_audio is coming from the audio hardware built
> onto the motherboard. It may be worth plugging the speakers in there
> and see what you get. If so, then maybe disabling the onboard audio
> through
> the motherboard bios would be a good bet.
>
> Best regards,
>
> J. D.
>
> _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
> >
>
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>
>
-------------- next part --------------
An HTML attachment was scrubbed...