[ale] Chaintech SKT600 motherboard

[Greg]

Well, it's brand new, fits the mobo's specs, and the beeping stops when I
play around with the jumpers so I am guessing it's ok.  However I will test
it just to make sure.

Greg


-----Original Message-----
From: ale-bounces at ale.org [mailto:ale-bounces at ale.org]On Behalf Of Jay
Loden
Sent: Wednesday, January 26, 2005 8:14 PM
To: Atlanta Linux Enthusiasts
Subject: Re: [ale] Chaintech SKT600 motherboard


This may sound like a stupid question, but is the RAM any good?  Most common
source of loud beeps and lack of POST test would be bad RAM or no RAM.

-Jay

On Wednesday 26 January 2005 08:01 pm, Greg wrote:
> I recently bought a Chaintech SKT600 motherboard and a AMD Duron 1.6GHz
> Socket A Processor to run a low end box and I can't even get it to POST -
> it just beeps like crazy.  If I move the FSB jumpers around there is no
> beeping but it still won't POST.  I have searched the web and it seems
that
> Chaintech has little "gotchas" that aren't advertised on their site or
> other sites.  I have a vid card in the AGP slot, mouse and keyboard
> attached correctly, and re-checked the wiring.  A floppy drive and hard
> drive are attached also.
>
> I just wondered if anyone on the list has any experience with this
> particular motherboard.  Any tips / hints would be appreciated.
>
> TIA,
>
> Greg
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale