[ale] Auto-mount floppy in Fedora

[Joe Knapka]

I guess the real problem is that "eject" is a physical operation for
floppies, the kernel doesn't have time to sync the mounted filesystem
before the disk pops out.

Isn't there some option to "mount" that means, "Don't buffer writes to
this filesystem"? It looks like "-o sync" might do it, but it's not
totally obvious.

-- Joe

Matthew Magee <mnmagee at juno.com> writes:

> James P. Kinney III wrote:
> 
> >On Mon, 2004-07-19 at 20:09, Matthew Magee wrote:
> >
> >
> >> According to my A+ book, pin 34 on a floppy drive signals
> >> insertion/ejection of a disk, so the mechanism appears to be there.
> >> On my Mandrake 9.2 system I can insert/eject a floppy at will.
> >> Does not open a Konqueror window though.  Still have to do that
> >> myself.
> >>
> >
> >Yep. There in theory only. Since the floppy drive was invented during
> >the DOS era (error?) and MS-DOS never supported a way to auto-check it
> >was never actually used.
> >
> >That said, it may be time to grab a floppy and do some cable prodding to
> >see if pin 34 really does change state on insertion.
> >
> >A box of AOL CD's says it won't. :) Unless the tester swiped the drive
> >from a Mac (that would be cheating and the cheater would be required to
> >_take_ a box of AOL CD's)
> >
> >
>  From The Linux Kernel Archive:
> http://www.uwsg.iu.edu/hypermail/linux/kernel/0110.2/0900.html
> 
> Andreas Dilger writes:
> />In the case of a floppy drive, this is very important, as you don't /
> />want to be cacheing data from one floppy after you have inserted a new /
> />floppy. /
> 
> Actually, the floppy drive is able to detect disk changes just fine,
> and since 1.0's the disk change signal (DCL) has been used to trigger
> cache flushing.
> 
> Bill Davidsen wrote:
> />That said, I have a few other thoughts. First, can't the kernel /
> />detect when a new floppy is inserted? /
> 
> Yes, the kernel (floppy driver) can do this, and indeed it does.
> 
> />I can't remember if there is an /
> />interupt generated when the floppy seats or not. /
> 
> Actually, it is not really an interrupt, but a bit that is set in the
> FD_DIR register. It stays set until the floppy disk driver
> acknowledges it by seeking the drive, or by selecting/unselecting it.
> 
> Before reading from the disk (or whenever it needs to know whether a
> disk has been changed or not), the floppy driver reads this bit, and
> if set notifies the VFS of the disk change. It then proceeds to seek,
> in order to clear this flag (needed in order to detect further
> changes)
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
> 
> 

-- 
Re-defeat Bush in '04.
--
pub  1024D/BA496D2B 2004-05-14 Joseph A Knapka
     Key fingerprint = 3BA2 FE72 3CBA D4C2 21E4  C9B4 3230 94D7 BA49 6D2B
If you really want to get my attention, send mail to
jknapka .at. kneuro .dot. net.