[ale] PCI USB card
jerry.yu at Voicecom.com
Fri Feb 20 10:37:32 EST 2004
does the hard drive support USB 2 ?
Also, in /etc/modules.conf, you may want to make sure only have 1.1 or 2. I
installed a PCI USB card onto a HP pentium 166MHZ box using RH 9 and it
showed two USB host adapater, one for USB 1.1 and one for 2.0.
From: Jun Wan [mailto:lorcm03 at yahoo.com]
Sent: Friday, February 20, 2004 10:30 AM
To: cfowler at outpostsentinel.com; Atlanta Linux Enthusiasts
Subject: Re: [ale] PCI USB card
Can you give me some detail of the hardware? What
motherboard you are using? I am kind of think the
machine BIOS is too old to support USB 2.0
--- Chris Fowler <cfowler at outpostsentinel.com> wrote:
> I've got one running.
> Try usbview
> On Fri, 2004-02-20 at 09:43, Jun Wan wrote:
> > Hi,
> > Anyone has experience to make a USB 2.0 PCI card
> > I /sbin/modprobe ehci-hcd
> > it say the module is in the kernel
> > and /sbin/lspci see the card
> > But I can't mount an extenal hard drive using this
> > card but I can mount the same extenal hard drive
> > (/dev/sda1) when it is connect to the USB 1.1 port
> > the Mother board. This is a Dell OptiPlex GX110
> > running Fedora core 2 test1
> > I have tried SUSE 9.0 and Slackware 9.1 too
> > Thank you!
> > Jun
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail SpamGuard - Read only the mail you
> > http://antispam.yahoo.com/tools
> > _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
> Ale mailing list
> Ale at ale.org
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
Ale mailing list
Ale at ale.org
More information about the Ale