[ale] CD burner problems
Jerry Yu
z.yu at voicecom.com
Mon May 12 15:52:43 EDT 2003
if the -scanbus is right, you'll have to set your write speed to
4x at most, and 2x to be reasonable.
On Mon, 12 May 2003, Herman, Izzie wrote:
#Also, make sure that you aren't setting the burn speed higher than the media (I generally go one speed down from media max). I know it'll cause a failure in burning, I am just not sure if that'll cause the OPC to fail or not.
#
#-----Original Message-----
#From: Geoffrey [mailto:esoteric at 3times25.net]
#Sent: Monday, May 12, 2003 3:38 PM
#To: ale at ale.org
#Subject: Re: [ale] CD burner problems
#
#
#As someone else noted, try a different media.
#
#ChangingLINKS.com wrote:
#> links:~ # cdrecord -scanbus
#> Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
#> Linux sg driver version: 3.2.0
#> Using libscg version 'schily-0.6'
#> scsibus0:
#> 0,0,0 0) 'IDE-CD ' 'R/RW 4x4x24 ' 'C12a' Removable CD-ROM
#> 0,1,0 1) *
#> 0,2,0 2) *
#> 0,3,0 3) *
#> 0,4,0 4) *
#> 0,5,0 5) *
#> 0,6,0 6) *
#> 0,7,0 7) *
#>
#>
#> On Monday 12 May 2003 01:45 pm, Geoffrey wrote:
#>
#>>What does 'cdrecord -scanbus' return?
#>>
#>>ChangingLINKS.com wrote:
#>>
#>>>I am having a problem gettng my CD burner to work under Suse. Below is
#>>>the output of what is happened (looks like it is going to work and fails
#>>>"OPC"). Anyone else run into this problem?
#>>>
#>>>Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
#>>>TOC Type: 1 = CD-ROM
#>>>Using libscg version 'schily-0.6'
#>>>atapi: 1
#>>>Device type : Removable CD-ROM
#>>>Version : 0
#>>>Response Format: 1
#>>>Vendor_info : 'IDE-CD '
#>>>Identifikation : 'R/RW 4x4x24 '
#>>>Revision : 'C12a'
#>>>Device seems to be: Generic mmc CD-RW.
#>>>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
#>>>Driver flags : SWABAUDIO
#>>>Supported modes: TAO PACKET RAW/R16
#>>>Drive buf size : 1572864 = 1536 KB
#>>>FIFO size : 4194304 = 4096 KB
#>>>Track 01: data 19 MB
#>>>Total size: 22 MB (02:14.21) = 10066 sectors
#>>>Lout start: 22 MB (02:16/16) = 10066 sectors
#>>>Current Secsize: 2048
#>>>ATIP info from disk:
#>>> Indicated writing power: 6
#>>> Is not unrestricted
#>>> Is not erasable
#>>> Disk sub type: Medium Type C, low Beta category (C-) (6)
#>>> ATIP start of lead in: -11231 (97:32/19)
#>>> ATIP start of lead out: 359848 (79:59/73)
#>>>Disk type: Short strategy type (Phthalocyanine or similar)
#>>>Manuf. index: 27
#>>>Manufacturer: Prodisc Technology Inc.
#>>>Blocks total: 359848 Blocks current: 359848 Blocks remaining: 349782
#>>>Starting to write CD/DVD at speed 4 in real TAO mode for single session.
#>>>Last chance to quit, starting real write in 9 seconds. 8
#>>>seconds. 7 seconds. 6 seconds. 5 seconds. 4
#>>>seconds. 3 seconds. 2 seconds. 1 seconds. 0
#>>>seconds. Operation starts.
#>>>Waiting for reader process to fill input buffer ... input buffer ready.
#>>>Performing OPC...
#>>>
#>>>cdrecord: Input/output error. send opc: scsi sendcmd: no error
#>>>CDB: 54 01 00 00 00 00 00 00 00 00 00
#>>>status: 0x2 (CHECK CONDITION)
#>>>Sense Bytes: 70 00 03 00 00 00 00 13 00 00 00 00 00 73 00 00
#>>>Sense Key: 0x3 Medium Error, Segment 0
#>>>Sencse Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
#>>>Sense flags: Blk 0 (not valid)
#>>>cmd finished after 7.3s timeout 60s
#>>>cdrecord: OPC failed.
#>>>cdrecord: fifo had 64 puts and 0 gets.
#>>>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
#>
#>
#
#--
#Until later: Geoffrey esoteric at 3times25.net
#
#The latest, most widespread virus? Microsoft end user agreement.
#Think about it...
#
#_______________________________________________
#Ale mailing list
#Ale at ale.org
#http://www.ale.org/mailman/listinfo/ale
#_______________________________________________
#Ale mailing list
#Ale at ale.org
#http://www.ale.org/mailman/listinfo/ale
#
Jerry Yu +1-404-487-8544 (O)
systems engineer jerry.yu at voicecom.com
is support, voicecom, llc www.voicecom.com
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale
More information about the Ale
mailing list