[ale] CD burner problems

ChangingLINKS.com x3 at ChangingLINKS.com
Mon May 12 14:25:25 EDT 2003


I am having a problem gettng my CD burner to work under Suse. Below is the 
output of what is happened (looks like it is going to work and fails "OPC"). 
Anyone else run into this problem?

Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.6'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'IDE-CD  '
Identifikation : 'R/RW 4x4x24     '
Revision       : 'C12a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO 
Supported modes: TAO PACKET RAW/R16
Drive buf size : 1572864 = 1536 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    19 MB        
Total size:       22 MB (02:14.21) = 10066 sectors
Lout start:       22 MB (02:16/16) = 10066 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359848 (79:59/73)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 349782
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds.          8 seconds.          
7 seconds.          6 seconds.          5 seconds.          4 seconds.          
3 seconds.          2 seconds.          1 seconds.          0 seconds. 
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...

cdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00 00 
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 13 00 00 00 00 00 73 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sencse Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 7.3s timeout 60s
cdrecord: OPC failed.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
-- 
Wishing you Happiness, Joy and Laughter,
Drew Brown
http://www.ChangingLINKS.com
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale





More information about the Ale mailing list