[ale] CF compared to IDE

hbbs at attbi.com hbbs at attbi.com
Mon Mar 31 15:58:41 EST 2003


Wow, this totally rocks.  Just one of these things - even a small one - could do
a lot to enhance the performance of older PCs.  

- Jeff

> The DOM is a CF->IDE converter in a compact format.  It has a IDE
> connector on one side and a power cable.  The power cable has 2 Power
> plugs.  Using one makes it behave like a master, using another makes it
> behave like a slave.  Although, since it plug directly into the socket
> on the MB, you need a IDE cable with one male plug to add another drive
> to that IDE channel. 
> 
> Booting is fairly fast too.  In a DOM, you get a good quality flash. 
> Something you may not get if you are purchasing a piece of CF for your
> camera.
> 
> I've used DOC (DiskOnChip) and DOM.  DOM is not single source like DOC
> and it behaves much better and faster.
> 
> 
> 
> 
> On Mon, 2003-03-31 at 14:29, Jeff Layton wrote:
> > Chris Fowler wrote:
> > 
> > > CF Rocks.  But check out DOM's.  They are CF's in a plastic shell that
> > > has an IDE connector.  They behave just like a IDE disk.
> > 
> > Isn't there something like a CF-> IDE converter as well?
> > 
> > Thanks!
> > 
> > Jeff
> > 
> > P.S. Sorry to email you directly
> > 
> > 
> > >
> > >
> > > On Mon, 2003-03-31 at 14:08, Jeff Layton wrote:
> > > > Hello,
> > > >
> > > >    Has anyone built a filesystem on a CF card (like ext2 or 3)
> > > > and compared it an IDE hard drive in terms of perforamnce?
> > > > I'm looking for a comparison of time to read/write data such
> > > > as a Bonnie++ test, IOZONE test, even hdparm or simple 'dd'.
> > > >
> > > > Thanks!
> > > >
> > > > Jeff
> > > >
> > > >
> > > > --
> > > >
> > > > Jeff Layton
> > > > Senior Engineer
> > > > Lockheed-Martin Aeronautical Company - Marietta
> > > > Aerodynamics & CFD
> > > >
> > > > "Is it possible to overclock a cattle prod?" - Irv Mullins
> > > >
> > > > This email may contain confidential information. If you have received this
> > > > email in error, please delete it immediately, and inform me of the mistake 
> by
> > > > return email. Any form of reproduction, or further dissemination of this
> > > > email is strictly prohibited. Also, please note that opinions expressed in
> > > > this email are those of the author, and are not necessarily those of the
> > > > Lockheed-Martin Corporation.
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Ale mailing list
> > > > Ale at ale.org
> > > > http://www.ale.org/mailman/listinfo/ale
> > >
> > > _______________________________________________
> > > Ale mailing list
> > > Ale at ale.org
> > > http://www.ale.org/mailman/listinfo/ale
> > 
> > --
> > 
> > Jeff Layton
> > Senior Engineer
> > Lockheed-Martin Aeronautical Company - Marietta
> > Aerodynamics & CFD
> > 
> > "Is it possible to overclock a cattle prod?" - Irv Mullins
> > 
> > This email may contain confidential information. If you have received this
> > email in error, please delete it immediately, and inform me of the mistake by
> > return email. Any form of reproduction, or further dissemination of this
> > email is strictly prohibited. Also, please note that opinions expressed in
> > this email are those of the author, and are not necessarily those of the
> > Lockheed-Martin Corporation.
> > 
> > 
> 
> 
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale





More information about the Ale mailing list