[ale] Interenet connection DING! DING! DING!
Greg
runman at speedfactory.net
Fri Feb 21 16:42:22 EST 2003
ok, maybe I am lost here, but how is it "faster". I mean a NIC is at 10
MBts, your connection is at most (lets say a really good dsl or a T1) is at
1MBts. So the bottleneck is 1MBts (not including any busses etc in the pc
itself). I just read the page on channel bonding and ok, it is good for a
network, cheaper than Gigabit Ethernet yadda yadda yadda, but how does this
make your Internet connection faster ? or are you just doing this for
redundancy ?
Greg
> -----Original Message-----
> From: ale-admin at ale.org [mailto:ale-admin at ale.org]On Behalf Of
> ChangingLINKS.com
> Sent: Friday, February 21, 2003 4:17 PM
> To: ale at ale.org
> Subject: Re: [ale] Interenet connection DING! DING! DING!
>
>
> Amazing. Geoffrey found that solution within 20 seconds of seeing
> my machine!
> As if he knew all the time and just want to make me wait to feel
> the POWER of
> 2 nics. . . .
>
> The command that we fixed it with was:
> route add default gw gateway.lan.here
>
> Then, to get it to "keep" the setting, we added the same line to the
> /etc/rc.d/init.d/netork on line 150.
>
> I finally have a working bond0 - it smells cool! It tastes cool!
> It IS cool,
> but what is more important is that it LOOKS cool! WOrd!
>
> Two network cards, just in case that 3com card goes out (yeah, right).
>
> THANK YOU for all of your help on my server. I promise I won't
> reinstall this
> box anytime soon. :) Ok. maybe not.
> I believe this was the longest thread without the word "Hitler" . . . .
> doh!
>
> Drew
>
> On Friday 21 February 2003 2:16 pm, James P. Kinney III wrote:
> > route add default gw 192.168.123.120
> > will add the missing default gateway machine IP.
> >
> > Or in the /etc/sysconfig/network file, add the line
> > GATEWAY=192.168.123.120
> >
> > and restart networking.
> >
> > On Fri, 2003-02-21 at 14:40, ChangingLINKS.com wrote:
> > > Yes. Very much so. But now, <crying> I get great connection
> to my other
> > > machines, but no "net" AND the 0.0.0.0 line is still missing from the
> > > route -n.
> > >
> > > On Friday 21 February 2003 1:24 pm, Geoffrey wrote:
> > > > Were you able to get to the internet prior to the bond effort???
> > > >
> > > > ChangingLINKS.com wrote:
> > > > > No dice. Still can't ping yahoo. I first had to modify
> the command to
> > > > > get acceptance. Then, I added each one (and the pair of eth) per
> > > > > directions. I tried removing the "extra bond0" but when I did, it
> > > > > said "network unreachable" and I had to restart the network (which
> > > > > changed all of the settings back).
> > > > >
> > > > > I used:
> > > > > route add -net 192.168.123.0 gw 192.168.123.120 netmask
> 255.255.255.0
> > > > > dev bond0/eth0/eth1 to get this:
> > > > >
> > > > > Kernel IP routing table
> > > > > Destination Gateway Genmask Flags
> Metric Ref
> > > > > Use Iface 192.168.123.0 192.168.123.120 255.255.255.0
> UG 0
> > > > > 0 0 bond0 192.168.123.0 192.168.123.120 255.255.255.0
> UG 0
> > > > > 0 0 eth1 192.168.123.0 192.168.123.120 255.255.255.0
> UG 0 0
> > > > > 0 eth0 192.168.123.0 0.0.0.0
> 255.255.255.0 U 0
> > > > > 0 0 bond0 192.168.123.0 0.0.0.0
> 255.255.255.0 U 0
> > > > > 0 0 eth0 192.168.123.0 0.0.0.0
> 255.255.255.0 U
> > > > > 0 0 0 eth1 127.0.0.0 0.0.0.0
> 255.0.0.0 U
> > > > > 0 0 0 lo
> > > > >
> > > > > On Thursday 20 February 2003 2:07 pm, Mike Lockhart wrote:
> > > > >>If memory serves me correct, one of these:
> > > > >>
> > > > >>route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> > > > >>192.168.123.120 dev bond0
> > > > >>or
> > > > >>route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> > > > >>192.168.123.120 dev eth0
> > > > >>or
> > > > >>route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> > > > >>192.168.123.120 dev eth1
> > > > >>or
> > > > >>try both of the last 2 together (might help).
> > > > >>
> > > > >>My route skills are kinda rusty, but its pretty straight
> forward, I
> > > > >>don't think your issue is DNS, although it wouldn't hurt to delete
> > > > >> all lines in your resolv.conf file and put the following:
> > > > >>
> > > > >>nameserver 207.69.188.185
> > > > >>nameserver 207.69.188.186
> > > > >>
> > > > >>just for testing purposes. (they're the mindspring
> nameserver, itchy
> > > > >> & scratchy, which have never failed for me). See if these things
> > > > >> help.
> > > > >>
> > > > >>Also, you might have somthing misconfigured in the bond0 setup,
> > > > >> although if its working on the network and you can ping
> both of the
> > > > >> IP's bound to it, its doubtful.
> > > > >>
> > > > >>- mike
> > > > >>
> > > > >>On Thu, 2003-02-20 at 14:20, ChangingLINKS.com wrote:
> > > > >>>Still no luck with the "manual setting:"
> > > > >>>
> > > > >>>root]# route add default gw 192.168.123.120 metric 1
> > > > >>>root]# /etc/init.d/network restart
> > > > >>>Shutting down interface bond0:
> [ OK ]
> > > > >>>Shutting down interface eth0:
> [ OK ]
> > > > >>>Shutting down interface eth1:
> [ OK ]
> > > > >>>Setting network parameters:
> [ OK ]
> > > > >>>Bringing up interface lo:
> [ OK ]
> > > > >>>Bringing up interface bond0:
> [ OK ]
> > > > >>>Bringing up interface eth0:
> [ OK ]
> > > > >>>Bringing up interface eth1:
> [ OK ]
> > > > >>>[root at links root]# ping www.yahoo.com
> > > > >>>ping: unknown host www.yahoo.com
> > > > >>>root]#
> > > > >>>
> > > > >>>Traffic on the LAN is fine. Even running an NFS server.
> Just can't
> > > > >>> get out. Please help.
> > > > >>>
> > > > >>>Drew
> > > > >>>
> > > > >>>On Thursday 20 February 2003 7:17 am, Joe wrote:
> > > > >>>>"ChangingLINKS.com" <x3 at ChangingLINKS.com> writes:
> > > > >>>>>On Wednesday 19 February 2003 3:55 pm, cfowler wrote:
> > > > >>>>>>#1) Make sure the default gqteway is setup
> > > > >>>>>
> > > > >>>>>How? Ok. I was looking for a gQteway file for a while. Ok. I am
> > > > >>>>>pretty
> > > > >>>
> > > > >>>sure
> > > > >>>
> > > > >>>>>that it is a problem with setting up the "gateway." Where do I
> > > > >>>>> put the IP for it (tried google and man -k)?
> > > > >>>>
> > > > >>>>Your DHCP server should set this up. If you have to do
> it manually,
> > > > >>>>do "route add default gw <IP address of gateway> metric 1"
> > > > >>>>at the command line. IMPORTANT: the <IP address of gateway> has
> > > > >>>>to be the address of the gateway ON YOUR LOCAL LAN, *not* the
> > > > >>>>address of the gateway interface facing your internet.
> > > > >>>>
> > > > >>>>I am clue-free about the organization of Redhat's startup
> > > > >>>>scripts (I'm a Slackware man from way back), but it's
> > > > >>>>certainly possible to add that command to some script to
> > > > >>>>make it happen on every boot. But again, I'd say you need
> > > > >>>>to get DHCP working properly if you really want to resolve
> > > > >>>>this.
> > > > >>>>
> > > > >>>>>>#2) Make sure resolv.conf is setup. etc/resolv.conf:
> > > > >>>>>
> > > > >>>>>domain domain.suffix
> > > > >>>>>nameserver 24.93.40.62
> > > > >>>>>nameserver 24.93.40.63
> > > > >>>>>search domain.suffix
> > > > >>>>
> > > > >>>>Again, if the machine is set up to configure itself via DHCP,
> > > > >>>>then DHCP should populate resolv.conf automagically. I
> > > > >>>>assume the name "domain.suffix" has been changed to protect
> > > > >>>>the innocent? (I bet it's really something like
> > > > >>>>"austin.rr.com"?)
> > > > >>>>
> > > > >>>>Are you using a black-box gateway unit (like a Linksys or
> > > > >>>>something)? Or is your gateway a PC firewall?
> > > > >>>>
> > > > >>>>Cheers,
> > > > >>>>
> > > > >>>>-- Joe
> > > > >>>>_______________________________________________
> > > > >>>>Ale mailing list
> > > > >>>>Ale at ale.org
> > > > >>>>http://www.ale.org/mailman/listinfo/ale
> > > > >>>
> > > > >>>--
> > > > >>>Wishing you Happiness, Joy and Laughter,
> > > > >>>Drew Brown
> > > > >>>http://www.ChangingLINKS.com
> > > > >>>_______________________________________________
> > > > >>>Ale mailing list
> > > > >>>Ale at ale.org
> > > > >>>http://www.ale.org/mailman/listinfo/ale
> > > > >>
> > > > >>_______________________________________________
> > > > >>Ale mailing list
> > > > >>Ale at ale.org
> > > > >>http://www.ale.org/mailman/listinfo/ale
>
> --
> Wishing you Happiness, Joy and Laughter,
> Drew Brown
> http://www.ChangingLINKS.com
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
>
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale
More information about the Ale
mailing list