[ale] Interenet connection
ChangingLINKS.com
x3 at ChangingLINKS.com
Fri Feb 21 14:21:07 EST 2003
No dice. Still can't ping yahoo. I first had to modify the command to get
acceptance. Then, I added each one (and the pair of eth) per directions. I
tried removing the "extra bond0" but when I did, it said "network
unreachable" and I had to restart the network (which changed all of the
settings back).
I used:
route add -net 192.168.123.0 gw 192.168.123.120 netmask 255.255.255.0 dev
bond0/eth0/eth1 to get this:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.123.0 192.168.123.120 255.255.255.0 UG 0 0 0 bond0
192.168.123.0 192.168.123.120 255.255.255.0 UG 0 0 0 eth1
192.168.123.0 192.168.123.120 255.255.255.0 UG 0 0 0 eth0
192.168.123.0 0.0.0.0 255.255.255.0 U 0 0 0 bond0
192.168.123.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.123.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
On Thursday 20 February 2003 2:07 pm, Mike Lockhart wrote:
> If memory serves me correct, one of these:
>
> route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> 192.168.123.120 dev bond0
> or
> route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> 192.168.123.120 dev eth0
> or
> route add -net 192.168.123.0/(16 or 24) netmask xxx.xxx.xxx.xxx gw
> 192.168.123.120 dev eth1
> or
> try both of the last 2 together (might help).
>
> My route skills are kinda rusty, but its pretty straight forward, I
> don't think your issue is DNS, although it wouldn't hurt to delete all
> lines in your resolv.conf file and put the following:
>
> nameserver 207.69.188.185
> nameserver 207.69.188.186
>
> just for testing purposes. (they're the mindspring nameserver, itchy &
> scratchy, which have never failed for me). See if these things help.
>
> Also, you might have somthing misconfigured in the bond0 setup, although
> if its working on the network and you can ping both of the IP's bound to
> it, its doubtful.
>
> - mike
>
> On Thu, 2003-02-20 at 14:20, ChangingLINKS.com wrote:
> > Still no luck with the "manual setting:"
> >
> > root]# route add default gw 192.168.123.120 metric 1
> > root]# /etc/init.d/network restart
> > Shutting down interface bond0: [ OK ]
> > Shutting down interface eth0: [ OK ]
> > Shutting down interface eth1: [ OK ]
> > Setting network parameters: [ OK ]
> > Bringing up interface lo: [ OK ]
> > Bringing up interface bond0: [ OK ]
> > Bringing up interface eth0: [ OK ]
> > Bringing up interface eth1: [ OK ]
> > [root at links root]# ping www.yahoo.com
> > ping: unknown host www.yahoo.com
> > root]#
> >
> > Traffic on the LAN is fine. Even running an NFS server. Just can't get
> > out. Please help.
> >
> > Drew
> >
> > On Thursday 20 February 2003 7:17 am, Joe wrote:
> > > "ChangingLINKS.com" <x3 at ChangingLINKS.com> writes:
> > > > On Wednesday 19 February 2003 3:55 pm, cfowler wrote:
> > > > > #1) Make sure the default gqteway is setup
> > > >
> > > > How? Ok. I was looking for a gQteway file for a while. Ok. I am
> > > > pretty
> >
> > sure
> >
> > > > that it is a problem with setting up the "gateway." Where do I put
> > > > the IP for it (tried google and man -k)?
> > >
> > > Your DHCP server should set this up. If you have to do it manually,
> > > do "route add default gw <IP address of gateway> metric 1"
> > > at the command line. IMPORTANT: the <IP address of gateway> has
> > > to be the address of the gateway ON YOUR LOCAL LAN, *not* the
> > > address of the gateway interface facing your internet.
> > >
> > > I am clue-free about the organization of Redhat's startup
> > > scripts (I'm a Slackware man from way back), but it's
> > > certainly possible to add that command to some script to
> > > make it happen on every boot. But again, I'd say you need
> > > to get DHCP working properly if you really want to resolve
> > > this.
> > >
> > > > > #2) Make sure resolv.conf is setup. etc/resolv.conf:
> > > >
> > > > domain domain.suffix
> > > > nameserver 24.93.40.62
> > > > nameserver 24.93.40.63
> > > > search domain.suffix
> > >
> > > Again, if the machine is set up to configure itself via DHCP,
> > > then DHCP should populate resolv.conf automagically. I
> > > assume the name "domain.suffix" has been changed to protect
> > > the innocent? (I bet it's really something like
> > > "austin.rr.com"?)
> > >
> > > Are you using a black-box gateway unit (like a Linksys or
> > > something)? Or is your gateway a PC firewall?
> > >
> > > Cheers,
> > >
> > > -- Joe
> > > _______________________________________________
> > > Ale mailing list
> > > Ale at ale.org
> > > http://www.ale.org/mailman/listinfo/ale
> >
> > --
> > Wishing you Happiness, Joy and Laughter,
> > Drew Brown
> > http://www.ChangingLINKS.com
> > _______________________________________________
> > Ale mailing list
> > Ale at ale.org
> > http://www.ale.org/mailman/listinfo/ale
>
> _______________________________________________
> Ale mailing list
> Ale at ale.org
> http://www.ale.org/mailman/listinfo/ale
--
Wishing you Happiness, Joy and Laughter,
Drew Brown
http://www.ChangingLINKS.com
_______________________________________________
Ale mailing list
Ale at ale.org
http://www.ale.org/mailman/listinfo/ale
More information about the Ale
mailing list