[ale] I give up

[cfowler]

Info:

System:
Win98 + RH 7.3 Stock

60GB HDD, 52X IDE-CD, 16x10x40x CD-RW


Burns fine under Windows.
Does not burn under Linux

On Fri, 2002-06-28 at 12:21, Mike Panetta wrote:
> Try the comand without -data.  I have never needed that argument.  If
> that does not work, try with a larger buffer (but it looks like its a
> drive/cabling problem more then anything else).  Is this drive being
> used through the IDE-SCSI emulation driver?  If it is make sure that its
> not being seen as an IDE drive, only SCSI.  You can accomplish this (if
> you compiled the ide-cd and ide-scsi drivers as modules) by making sure
> that the ide-cd driver never gets loaded, and if it is, unload it and
> load the ide-scsi one instead.
> 
> I have burned CD's on linux over scsi, ide, and USB (of all the crazy
> things), and I have never had this problem...  It may be software
> related.  What kernel are you running?  IIRC there were some known
> problems with the IDE-SCSI emulation and cd burning in some of the 2.2.x
> kernels.  You may want to search marc for "2.2.x coaster" or something
> like that.
> 
> 
> Mike
> 
> On Fri, 2002-06-28 at 05:11, cfowler wrote:
> > I give up on recording CD's in Linux.  Can someone please tell me what
> > the hell I'm doing wrong?
> > 
> > 
> > 
> > [root at cfowler tmp]# cdrecord -v -speed=10 -dev=0,0,0 -data ./Win98.iso
> > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '0,0,0'
> > scsibus: 0 target: 0 lun: 0
> > Linux sg driver version: 3.1.22
> > Using libscg version 'schily-0.5'
> > atapi: 1
> > Device type    : Removable CD-ROM
> > Version        : 0
> > Response Format: 1
> > Vendor_info    : 'CDWRITER'
> > Identifikation : 'IDE1610         '
> > Revision       : '0.19'
> > Device seems to be: Generic mmc CD-RW.
> > Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> > Driver flags   : SWABAUDIO
> > Drive buf size : 1971200 = 1925 KB
> > FIFO size      : 4194304 = 4096 KB
> > Track 01: data  626 MB
> > Total size:     719 MB (71:14.21) = 320566 sectors
> > Lout start:     719 MB (71:16/16) = 320566 sectors
> > Current Secsize: 2048
> > ATIP info from disk:
> >   Indicated writing power: 4
> >   Is not unrestricted
> >   Is not erasable
> >   Disk sub type: Medium Type A, high Beta category (A+) (3)
> >   ATIP start of lead in:  -11079 (97:34/21)
> >   ATIP start of lead out: 359849 (79:59/74)
> > Disk type:    Long strategy type (Cyanine, AZO or similar)
> > Manuf. index: 11
> > Manufacturer: Mitsubishi Chemical Corporation
> > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 39283
> > Starting to write CD/DVD at speed 12 in write mode for single session.
> > Last chance to quit, starting real write in 0 seconds. Operation starts.
> > Waiting for reader process to fill input buffer ... input buffer ready.
> > Performing OPC...
> > Starting new track at sector: 0
> > Track 01:   0 of 626 MB written.cdrecord: Input/output error. write_g1:
> > scsi sendcmd: no error
> > CDB:  2A 00 00 00 00 1F 00 00 1F 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 71 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
> > Sense Key: 0x5 Illegal Request, deferred error, Segment 0
> > Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No
> > matching qualifier] Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 0.001s timeout 40s
> > 
> > write track data: error after 63488 bytes
> > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> > Writing  time:   10.761s
> > Fixating...
> > cdrecord: Input/output error. close track/session: scsi sendcmd: no
> > error
> > CDB:  5B 00 02 00 00 00 00 00 00 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
> > session) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 0.000s timeout 480s
> > cmd finished after 0.000s timeout 480s
> > Fixating time:    0.002s
> > cdrecord: fifo had 65 puts and 2 gets.
> > cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%.
> > 
> > 
> > This is a brand new unit that has proved itself working under Winbloze.
> > 
> > 
> > ---
> > This message has been sent through the ALE general discussion list.
> > See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
> > sent to listmaster at ale dot org.
> > 
> 
> 
> 
> 



---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.