[ale] Question on bootable ISOs

[F. Grant Robertson]

I'm only guessing but, I'd believe /dev/fd0 is the image..  the image being
swapped in for a: happens at the BIOS level, therefore, if the kernel uses
bios to interact with the floppy it's interacting with what the BIOS says is
the floppy (which in this case is the readonly image).  If however, the
kernel uses the actual hardware i/o address and IRQ to communicate with the
floppy controller, then your going to be talking to the floppy.

wouldn't "mount" tell you what the kernel thinks it has mounted?  Wouldn't
reading from /dev/fd0 cause the floppy light to come on?  Either of these
things should give you your answer post-haste..

-G


-----Original Message-----
From: Christopher Fowler [mailto:cfowler at outpostsentinel.com]
To: ale at ale.org
Subject: Re: [ale] Question on bootable ISOs

On a windows bootabl CD, the boot image is a virtual A:.  every
operation to A: in dos is an operation on that image and not the real
floppy drive

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.371 / Virus Database: 206 - Release Date: 6/13/2002


---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.