[ale] Lite-On 1640

[cfowler]

I've deterimed the unit is faulty after failed burns in Winbloze 98. 
I've also cam to the conclusion that Ginstar does not do test burns
since we picked up thie machine new today.  Or was it?

Chris

On Thu, 2002-06-13 at 16:40, cfowler wrote:
> Is there a secret to getting the LITE-ON 1640 CD-RW to work under
> RH7.3?  Here is what I get:
> 
> 
> 
> [root at cfowler tmp]# cdrecord -v -speed=2 -dev=0,0,0 -data ./l.iso
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.22
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'LITE-ON '
> Identifikation : 'LTR-16102B      '
> Revision       : 'OS06'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 1966272 = 1920 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data    0 MB         padsize: 280 KB
> Total size:       0 MB (00:04.02) = 302 sectors
> Lout start:       1 MB (00:06/02) = 302 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 4
>   Is not unrestricted
>   Is not erasable
>   Disk sub type: Medium Type A, high Beta category (A+) (3)
>   ATIP start of lead in:  -11849 (97:24/01)
>   ATIP start of lead out: 359848 (79:59/73)
> Disk type:    Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 25
> Manufacturer: Taiyo Yuden Company Limited
> Blocks total: 359848 Blocks current: 359848 Blocks remaining: 359546
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01:   0 of   0 MB written.
> Track 01: writing 280 KB of pad data.
> Track 01: Total bytes read/written: 327680/614400 (300 sectors).
> Writing  time:   27.970s
> Fixating...
> 
> cdrecord: Input/output error. close track/session: scsi sendcmd: no
> error
> CDB:  5B 00 02 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 72 00 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x72 Qual 0x00 (session fixation error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 113.069s timeout 480s
> cmd finished after 113.069s timeout 480s
> Fixating time:  113.095s
> cdrecord: fifo had 6 puts and 6 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> [root at cfowler tmp]#
> 
> 
> Do I need to run Windows to burn on this thing?
> 
> 
> 
> 
> ---
> This message has been sent through the ALE general discussion list.
> See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
> sent to listmaster at ale dot org.
> 
> 
> 



---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be
sent to listmaster at ale dot org.