[ale] SSH slow to connect?

[Mike Panetta]

Ok, I did ssh -v and here is what I get. (see attached)  Does this mean
anything to you?

Mike

On Sat, 2002-06-15 at 22:02, Raylynn Knight wrote:

> 
> This is definitely not due to the speed of the CPU.  I can ssh to my
> Apple Macintosh Q950 a 33 Mhz 68040 and connection takes all of 11
> seconds.  Try invoking ssh with the -v option which will give verbose
> output of what is happening when the connection is being negotiated. 
> 
> Ray Knight
> 
> 
> 
> ---
> This message has been sent through the ALE general discussion list.
> See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
> sent to listmaster at ale dot org.
> 



OpenSSH_3.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: restore_uid
debug1: ssh_connect: getuid 500 geteuid 0 anon 1
debug1: Connecting to 192.168.1.103 [192.168.1.103] port 22.
debug1: temporarily_use_uid: 500/500 (e=0)
debug1: restore_uid
debug1: temporarily_use_uid: 500/500 (e=0)
debug1: restore_uid
debug1: Connection established.
debug1: read PEM private key done: type DSA
debug1: read PEM private key done: type RSA
debug1: identity file /home/mike/.ssh/identity type -1
debug1: identity file /home/mike/.ssh/id_rsa type -1
debug1: identity file /home/mike/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9
debug1: match: OpenSSH_3.0.2p1 Debian 1:3.0.2p1-9 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 127/256
debug1: bits set: 1594/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY



---
This message has been sent through the ALE general discussion list.
See http://www.ale.org/mailing-lists.shtml for more info. Problems should be 
sent to listmaster at ale dot org.