[ale] ide reset

Scott Nolde smnoldelinux at mediaone.net
Fri Mar 16 18:36:59 EST 2001


I'm getting quite a few of these messages:
Mar 16 13:25:54 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 13:25:57 gw kernel: ide0: reset: success 
Mar 16 13:41:54 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 13:41:55 gw kernel: ide0: reset: success 
Mar 16 14:00:29 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 14:00:30 gw kernel: ide0: reset: success 
Mar 16 14:35:04 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 14:35:05 gw kernel: ide0: reset: success 
Mar 16 15:09:39 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 15:09:39 gw kernel: ide0: reset: success 
Mar 16 15:41:54 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 15:41:54 gw kernel: ide0: reset: success 
Mar 16 16:18:49 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 16:18:49 gw kernel: ide0: reset: success 
Mar 16 16:41:53 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 16:41:54 gw kernel: ide0: reset: success 
Mar 16 17:28:03 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 17:28:04 gw kernel: ide0: reset: success 
Mar 16 18:02:38 gw kernel: hda: irq timeout: status=0xd0 { Busy } 
Mar 16 18:02:39 gw kernel: ide0: reset: success 

It seems my hard drive is sleeping.  I don't have the hdparm set for
this, but every time it 'wakes up' I get this error.  My hdparm settings
when I boot are:
hdparm -d1 -u1 -m8 -c3 -A1 /dev/hda

Is there any way i can avoid this from happening?

My suspicion is I compiled something in the kernel... but I don't know
where it is... unless something's just plain wrong.  I don't suspect a
bad hard drive.  This one's less than a year old.

Can anyone glean information about this 'problem' from the following
stuff?
[root at gw linux-2.4.1]# hdparm /dev/hda

/dev/hda:
 multcount    =  0 (off)
 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  0 (off)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 2193/255/63, sectors = 35239680, start = 0
[root at gw linux-2.4.1]# hdparm -I /dev/hda

/dev/hda:

 Model=DW CCA140800 D                          , FwRev=7JO83AK0,
SerialNo=DWW-6T96005960 1    
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
 BuffType=DualPortCache, BuffSize=1966kB, MaxMultSect=16, MultSect=8
 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=35239680
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 


- Scott
-- 
Never do Windows again with  |  Scott M. Nolde
Linux!  No streaks, haze or  |  smnoldelinux at mediaone.net
glaze!                       |  
6:25pm up 7 days, 18:34, 1 user, load average: 1.16, 1.09, 1.03
--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.





More information about the Ale mailing list