[ale] PPP via serial null-modem cable

[Joseph A. Knapka]

Problem solved. It was hardware.

-- Joe

"Joseph A. Knapka" wrote:
> 
> Hi everyone,
> 
> Has anyone here run PPP to connect two machines via a serial
> line? I'm following the instructions in the PPP-HOWTO
> about this, but it's not working. Specifically, I (seem to)
> get a connection, but both pppd's exit after a few seconds
> with "LCP: timeout sending Config-Requests".
> 
> On machine A, I do:
> 
> pppd -detach crtscts local 10.0.0.1:10.0.0.2 /dev/ttyS0 9600
> 
> and on machine B:
> 
> pppd -detach crtscts local 10.0.0.2:10.0.0.1 /dev/ttyS0 9600
> 
> After doing the second command, I get "Connect ppp0<-->/dev/ttyS0"
> on each machine, but they can't ping one another, and after
> twenty seconds or so the LCP timeout message appears.
> 
> Thanks in advance,
> 
> -- Joe Knapka
> "You know how many remote castles there are along the gorges? You
>  can't MOVE for remote castles!" -- Lu Tze re. Uberwald
> // Linux MM Documentation in progress:
> // http://home.earthlink.net/~jknapka/linux-mm/vmoutline.html
> 2nd Lbl A + 1 = 2nd Pause 2nd Prt GTO 2 R/S
> --
> To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.

-- 
"You know how many remote castles there are along the gorges? You
 can't MOVE for remote castles!" -- Lu Tze re. Uberwald
// Linux MM Documentation in progress:
// http://home.earthlink.net/~jknapka/linux-mm/vmoutline.html
2nd Lbl A + 1 = 2nd Pause 2nd Prt GTO 2 R/S
--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.