[ale] scsi problems

David Hamm dhamm at itrepro.com
Tue Sep 26 13:06:38 EDT 2000


A review of the mkinitrd command came to mind after reading your
message.  Another satisfied customer.   Thanks...

 On Tue, 26 Sep 2000, Ray Knight - Clientlink wrote:
> David Hamm wrote:
> > Subject: [ale] scsi problems
> >
> >
> > I have a system with an Adaptec SCSI controller on the
> > motherboard and an AMI
> > MegaRaid controller in one of the PCI slots.  When I boot the
> > system the AMI
> > controller showes up as SCSI0 and the Aadaptec showes up as
> > SCSI1.  Can I make
> > the Adaptec SCSI0 and the AMI SCSI1 since linux is on the Adaptec?
> >
> 
> How is your kernel configured?  Are the SCSI drivers built into the kernel
> or are you using modules?
> You need to change the load order of the SCSI drivers.  This is easy if you
> are using modules and initrd. You need to change your modules.conf file to
> have the correct alias for SCSI0 and SCSI1 and rebuild the initrd.  If the
> drivers are built into the kernel I don't know how to change the load order.
> 
> 
> Ray Knight
> audilvr at speakeasy.org
> 
> --
> To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.
--
---------------------------------
David Hamm
Systems Analyst
Imaging Technologies Services Inc.
email: dhamm at itrepro.com
voice: 404-870-6663
---------------------------------
--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.





More information about the Ale mailing list