[ale] device name for SCSI DLT

Danny Cox danny at compgen.com
Mon Sep 18 11:39:38 EDT 2000


On Mon, 18 Sep 2000, Chris Fowler wrote:

>    # mt -t /dev/st0 status
>    /dev/st0: No such device
>    # ls -l /dev/st0
>    crw-rw----    1 root     disk       9,   0 Sep 18 10:31 /dev/st0
>    #
> 
> So it's there.  It should control this device then, right?  Now, the drive
> is really an HP SureStore DLT-80.  From what I can tell from the info I can
> find online, though, the Quantum DLT8000 has the same specs as this HP
> drive, so presumably there's no problem there -- right?

	Right.
 
	<snip>

> sym53c895-0: command processing resumed
> sym53c895-1: command processing resumed
>   Vendor: QUANTUM   Model: DLT8000           Rev: 010F
>   Type:   Sequential-Access                  ANSI SCSI revision: 02
> scsi2: scanning channel 1 for devices.
> scsi2: scanning channel 2 for devices.
> scsi2: scanning channel 3 for devices.
> scsi2: scanning virtual channel for logical drives.
>   Vendor: MegaRAID  Model: LD0 RAID0 17365R  Rev:   C 
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi2, channel 3, id 0, lun 0
>   Vendor: MegaRAID  Model: LD1 RAID0 86825R  Rev:   C 
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sdb at scsi2, channel 3, id 0, lun 1
>   Vendor: MegaRAID  Model: LD2 RAID0 04190R  Rev:   C 
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sdc at scsi2, channel 3, id 0, lun 2
> scsi : detected 4 SCSI generics 3 SCSI disks total.
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 35563520 [17365 MB] [17.4
> GB]
> SCSI device sdb: hdwr sector= 512 bytes. Sectors= 177817600 [86825 MB] [86.8
> GB]
> SCSI device sdc: hdwr sector= 512 bytes. Sectors= 213381120 [104190 MB]
> [104.2 GB]

	This is a stupid question, but you *do* have the SCSI Tape option
either compiled in or a module, don't you?

Danny

P.S. This the Voice Of Experience, speaking.

--
To unsubscribe: mail majordomo at ale.org with "unsubscribe ale" in message body.





More information about the Ale mailing list