[ale] problems with XF86-332 and AMD K6-300

[Jim Popovitch]

Checkout:
http://www.driver-forum.com/graphics/953.html

I had mine working once, but since then I added a Riva TNT card.  One note,
the SiS 6326 seemed really sluggish at 1024x768x24bit.  Good luck!

-Jim

-----Original Message-----
 From: frank zamenski <fzamenski at voyager.net>
To: ale at ale.org <ale at ale.org>
Date: Sunday, February 07, 1999 9:00 PM
Subject: [ale] problems with XF86-332 and AMD K6-300


>Hi everyone,
>
>I'm having problems with Xfree86 3.3.2-318 and my AMD K6-300 D2. This board
>has onboard integrated SiS 6326 8mg AGP vid, but I note Xfree 332 does not
>appear to directly support this. The best I can seem to get out of
>experimenting with the xf86 db selections is by choosing the 'generic'
>SVGA_server; the Xprobe comes back with 25.18 (well, sometimes, depending
>on what I've done). But I can only get low-res, and only about 2/3rds of
>the viewable area is scrollable at that, and ctrl-alt-[keybd]+/- does
>nothing. It is hovever, an impressively quick, albeit crippled, desktop! If
>I knew how to 'tweak' the XF86Config file, I would; any ideas? Using RH
>5.1. Monitor is a 17" ViewSonic G773, and with the Sis a/a, this system
>supports up to 1280x1024x16bit under Win95. 128mg system RAM. TIA.
>
>Frank Zamenski
>
>
>