[ale] problems with XF86-332 and AMD K6-300

[frank zamenski]

Thanks much, Jim! Lots of usefull stuff over there for that Sis 6326!

Frank


At 10:21 PM 2/7/99 -0500, you wrote:
>Checkout:
>http://www.driver-forum.com/graphics/953.html
>
>I had mine working once, but since then I added a Riva TNT card.  One note,
>the SiS 6326 seemed really sluggish at 1024x768x24bit.  Good luck!
>
>-Jim
>
>-----Original Message-----
>From: frank zamenski <fzamenski at voyager.net>
>To: ale at ale.org <ale at ale.org>
>Date: Sunday, February 07, 1999 9:00 PM
>Subject: [ale] problems with XF86-332 and AMD K6-300
>
>
>>Hi everyone,
>>
>>I'm having problems with Xfree86 3.3.2-318 and my AMD K6-300 D2. This board
>>has onboard integrated SiS 6326 8mg AGP vid, but I note Xfree 332 does not
>>appear to directly support this. The best I can seem to get out of
>>experimenting with the xf86 db selections is by choosing the 'generic'
>>SVGA_server; the Xprobe comes back with 25.18 (well, sometimes, depending
>>on what I've done). But I can only get low-res, and only about 2/3rds of
>>the viewable area is scrollable at that, and ctrl-alt-[keybd]+/- does
>>nothing. It is hovever, an impressively quick, albeit crippled, desktop! If
>>I knew how to 'tweak' the XF86Config file, I would; any ideas? Using RH
>>5.1. Monitor is a 17" ViewSonic G773, and with the Sis a/a, this system
>>supports up to 1280x1024x16bit under Win95. 128mg system RAM. TIA.
>>
>>Frank Zamenski
>>
>>
>>
>
>
>